Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Push to release and lock SD card

  1. #1
    Junior Member
    Join Date
    Sep 2018
    Posts
    3

    Push to release and lock SD card

    Would it be possible to request a T3.6 with a push-release SD card mount? Currently they are pull to release without locks. In some applications, the card comes loose. I am currently taping it to the board with ducktape so it will stay in place. I don't know if that would be a matter of just putting a different component or if it would require a board layout change.

    Thanks!

  2. #2
    Junior Member
    Join Date
    Sep 2018
    Posts
    3
    Paul, any answers to this? Would really appreciate it for a project.

  3. #3
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    18,367
    The answer is no.

    Or technically, yes you can request anything, but this change isn't going to happen. The main problem is the size. The space available is at most 13 mm wide. Those sockets with the spring mechanism are about 14 to 16 mm wide, so they simply can not fit.

  4. #4
    Junior Member
    Join Date
    Sep 2018
    Posts
    3
    Thanks! Duck tape it is then

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •