johnwatterson
Well-known member
Good morning all, Need some guidance on this art project - In essences, the project involves projecting an exiting image to the teensy-WS2912B panel for one minute and then stopping until restarted. The panel is 432 by 8 2812B leds using the teensy 3.2 and is working and displays a video test pattern I got off another site so hardware works fine. First I need the teensy code needed to add to the bitmap image that I translate from paint or photoshop to send to the teensy-led panel for display. That maybe all I need but I will need to add SD card storage in the near future if there are suggestions, I would appreciate it. Thanks.