Apologies if this is in the wrong section, but has anyone had luck with either the 2.3", 2.42", or 2.7" monochrome OLED displays from Adafruit and a T3.x? The 2.3" and 2.42" use the SSD1305 driver chip and the 2.7" uses the SSD1325 driver chip so I was just wondering if anyone has gotten these displays to work using the provided adafruit libraries. I'll be using a T3.5 and I wanted to check if they were compatible before potentially dropping up to $50.

2.7" https://www.adafruit.com/product/2674
2.3" https://www.adafruit.com/product/2675
2.42" https://www.adafruit.com/product/2719

Thanks!