Hello! Attached is the example code for midi buttons. I have a pedalboard with 14 latching footswitches that i am trying to get to send midi on/off signals into a DAW through the teensy board. My problem is I haven't been able to get any midi signals to go through. Even with the example code, some of the pins that are being used for foot switches on the board do not work. I already have it set to USB midi in tools, so I don't believe that is the problem, and it registers on my audio midi devices on my mac, but it does not seem to be working still. I have also tried to use the examples from the bounce.h library but it seems to still be doing the same thing, registers the teensy midi device but no midi input. Any help would be much appreciated!