Seems there is a problem with software serial on the Teensy LC.
When i run the following code my IC just freezes up. Any tips here? I am using pins 1 and 0 to determine if i wired my device backwards.
Arduino 1.8.7 with Teensyduino 1.44
I am using library SoftwareSerial at version 1.0 in folder: C:\Program Files (x86)\Arduino\hardware\teensy\avr\libraries\SoftwareSerial
When i run the following code my IC just freezes up. Any tips here? I am using pins 1 and 0 to determine if i wired my device backwards.
Arduino 1.8.7 with Teensyduino 1.44
I am using library SoftwareSerial at version 1.0 in folder: C:\Program Files (x86)\Arduino\hardware\teensy\avr\libraries\SoftwareSerial
Code:
#include <SoftwareSerial.h>
SoftwareSerial mySerial(1, 0); // RX, TX
void setup() {
mySerial.begin(19200);
}
void loop() {
mySerial.write("AT\r");
Serial.println("...");
delay(1000);
}