sschiesser
Member
Hi,
I was wondering if I can physically disconnect the built-in LED on Teensy 3.6. Since pin13 is used for the audio shield (I2S_DOUT), I cannot simply disable it in software, but would like to save some current.
Didn't find anything in the forum (strange actually)...
Thanks for any help,
Sebastien
I was wondering if I can physically disconnect the built-in LED on Teensy 3.6. Since pin13 is used for the audio shield (I2S_DOUT), I cannot simply disable it in software, but would like to save some current.
Didn't find anything in the forum (strange actually)...
Thanks for any help,
Sebastien