Hi. I'm a new forum member. I searched the forum and searched the FAQ for a similar issue but did not find one. Sorry if I missed it.
The USB connector on my Teensy 3.2 just "fell off". I was applying pressure to connect a USB cable to the board when the USB connector detached from the board. The connector was not pried up - it simply detached from the board in the direction of connector insertion.
Any recourse? I'm not sure if its possible to re-solder this part to the board - the pins appear to be in satisfactory condition, but with the big pads under the connector, I see no way to re-flow the solder.
Thanks,
- Homarne
The USB connector on my Teensy 3.2 just "fell off". I was applying pressure to connect a USB cable to the board when the USB connector detached from the board. The connector was not pried up - it simply detached from the board in the direction of connector insertion.
Any recourse? I'm not sure if its possible to re-solder this part to the board - the pins appear to be in satisfactory condition, but with the big pads under the connector, I see no way to re-flow the solder.
Thanks,
- Homarne