how to mate the audio card to teensy 3.6

Status
Not open for further replies.
The Teensy 3.5/3.6 mounts directly on top of (or underneath) the audio card using the first 14 pins on each side. All of the pins that the audio card uses are exactly the same as the first set of pins in the 3.5/3.6. The last 10 pins on each side of the Teensy 3.5/3.6 are not connected to the audio card.

There is the back row of 5 pins in the Teensy 3.2 that got relocated in the Teensy 3.5/3.6, but the audio card does not use them (nor have holes to connect them).

While the audio card has a micro-SD card reader, you will get faster performance if you use the reader on the Teensy 3.5/3.6.
 
Last edited:
Status
Not open for further replies.
Back
Top