Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: how to mate the audio card to teensy 3.6

  1. #1

    how to mate the audio card to teensy 3.6

    On this page
    https://www.pjrc.com/store/teensy3_audio.html

    There is a diagram of the audio card mounted on top of the teensy. Not clear to me how the pinouts align. Does anyone have more details/pictures of this process?

    Thanks
    Leor

  2. #2
    Senior Member+ MichaelMeissner's Avatar
    Join Date
    Nov 2012
    Location
    Ayer Massachussetts
    Posts
    2,921
    The Teensy 3.5/3.6 mounts directly on top of (or underneath) the audio card using the first 14 pins on each side. All of the pins that the audio card uses are exactly the same as the first set of pins in the 3.5/3.6. The last 10 pins on each side of the Teensy 3.5/3.6 are not connected to the audio card.

    There is the back row of 5 pins in the Teensy 3.2 that got relocated in the Teensy 3.5/3.6, but the audio card does not use them (nor have holes to connect them).

    While the audio card has a micro-SD card reader, you will get faster performance if you use the reader on the Teensy 3.5/3.6.
    Last edited by MichaelMeissner; 12-14-2018 at 04:27 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •