Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Cannot communicate with teensy 3.6

  1. #1

    Cannot communicate with teensy 3.6

    Windows 10. installed teensyduino. When I plug in the board to USB, it runs the default blinky program. If I try to upload anything, nothing happens in the teensy loader. Also noticed that when I do plug in the board, there is no notification sound from windows, such as that you get when plugging in a usb device of some sort.

    Thanks
    Leor

  2. #2
    Senior Member+ Theremingenieur's Avatar
    Join Date
    Feb 2014
    Location
    Colmar, France
    Posts
    2,381
    Make sure that yourUSB cable is not only a cheap charger cable without data connections, but a fully wired one.

  3. #3
    Senior Member
    Join Date
    Dec 2016
    Location
    Montreal, Canada
    Posts
    2,997
    my iphone cable works fine on teensy 3.6...

  4. #4
    I ordered some new cables so will try it out thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •