17:07:06.506 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:07:06.507 (ports 5): nothing new, skipping HID & Ports enum
17:07:06.508 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:07:06.509 (ports 5): nothing new, skipping HID & Ports enum
17:07:06.808 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:07:06.809 (ports 5): nothing new, skipping HID & Ports enum
17:07:08.813 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:07:08.814 (ports 5): nothing new, skipping HID & Ports enum
17:09:01.170 (post_compile 1): Begin, version=1.47-beta4, high-res time
17:09:01.641 (loader): Teensy Loader 1.47-beta4, begin program
17:09:01.736 (loader): File "uncannyEyes.ino.hex". 197012 bytes, 10% used
17:09:01.748 (loader): Listening for remote control on port 3149
17:09:01.748 (loader): initialized, showing main window
17:09:01.772 (loader): remote connection 1260 opened
17:09:01.772 (loader): remote cmd from 1260: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)"
17:09:01.773 (post_compile 1): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)
17:09:01.773 (loader): remote cmd from 1260: "status"
17:09:01.775 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:01.776 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:01.776 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:01.776 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:01.776 (loader): HID/win32: vid:046D pid:B01A ver:0003
17:09:01.777 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:01.777 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:01.778 (loader): remote cmd from 1260: "dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\"
17:09:01.778 (loader): remote cmd from 1260: "file:Blink.ino.hex"
17:09:01.779 (post_compile 1): Status: 1, 0, 0, 0, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:09:01.779 (post_compile 1): Sending command: dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\
17:09:01.779 (post_compile 1): Sending command: file:Blink.ino.hex
17:09:01.783 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:09:01.787 (loader): remote cmd from 1260: "status"
17:09:01.789 (loader): remote cmd from 1260: "auto:on"
17:09:01.790 (post_compile 1): Status: 1, 0, 0, 0, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:09:01.790 (post_compile 1): Sending command: auto:on
17:09:01.790 (post_compile 1): Disconnect
17:09:01.801 (loader): remote connection 1260 closed
17:09:02.009 (post_compile 2): Begin, version=1.47-beta4, high-res time
17:09:02.011 (loader): remote connection 1332 opened
17:09:02.011 (loader): remote cmd from 1332: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)"
17:09:02.011 (loader): remote cmd from 1332: "status"
17:09:02.011 (post_compile 2): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)
17:09:02.013 (loader): remote cmd from 1332: "dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\"
17:09:02.013 (post_compile 2): Status: 1, 1, 0, 0, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:09:02.013 (post_compile 2): Sending command: dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\
17:09:02.014 (post_compile 2): Sending command: file:Blink.ino.hex
17:09:02.014 (loader): remote cmd from 1332: "file:Blink.ino.hex"
17:09:02.018 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:09:02.021 (loader): remote cmd from 1332: "status"
17:09:02.023 (post_compile 2): Status: 1, 1, 0, 0, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:09:02.023 (post_compile 2): Disconnect
17:09:02.035 (loader): remote connection 1332 closed
17:09:02.035 (loader): remote connection 1332 opened
17:09:02.035 (post_compile 3): Running teensy_reboot: "D:\arduino-1.8.9\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY40" "-port=usb:0/140000/0/7/2" "-portlabel=(null)" "-portprotocol=(null)"
17:09:02.051 (reboot 4): Begin, version=1.47-beta4, high-res time
17:09:02.051 (reboot 4): location = usb:0/140000/0/7/2
17:09:02.051 (reboot 4): portlabel = (null)
17:09:02.051 (reboot 4): portprotocol = (null)
17:09:02.051 (reboot 4): LoadLibrary cfgmgr32 ok
17:09:02.051 (reboot 4): LoadLibrary ntdll ok
17:09:02.053 (reboot 4): nothing new, skipping HID & Ports enum
17:09:02.055 (loader): remote connection 1268 opened
17:09:02.055 (reboot 4): Disconnect
17:09:02.067 (loader): remote connection 1268 closed
17:09:02.077 (loader): remote connection 1332 closed
17:09:03.160 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:09:03.161 (loader): remote connection 1352 opened
17:09:03.164 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:09:03.164 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:09:03.164 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0004
17:09:03.164 (ports 5): found_usb_device, devinst=0000001c
17:09:03.164 (ports 5): add: loc=usb:0/140000/0/7/2, class=HID, vid=16C0, pid=0478, ver=0004, serial=0008f870, dev=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:09:03.164 (ports 5): hiddev_from_devinst_list: iface=0
17:09:03.165 (ports 5): found_usb_device complete
17:09:03.166 (ports 5): hid, found devinst=0000001D
17:09:03.166 (ports 5): hid, path=\\?\hid#vid_16c0&pid_0478#7&283234e0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
17:09:03.166 (ports 5): hid, opened handle
17:09:03.166 (ports 5): devinst=0000001D, location=usb:0/140000/0/7/2
17:09:03.166 (ports 5): vid=16C0, pid=0478, ver=0004, usepage=FF9C, use=0024
17:09:03.166 (ports 5): devpath=\\?\hid#vid_16c0&pid_0478#7&283234e0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
17:09:03.166 (ports 5): usb_add: usb:0/140000/0/7/2 hid#vid_16c0&pid_0478 (Teensy 4-Beta2) Bootloader
17:09:03.233 (loader): Device came online, code_size = 2031616
17:09:03.233 (loader): Board is: Teensy 4-Beta2 (IMXRT1062), version 0.04
17:09:03.237 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:09:03.238 (loader): set background IMG_ONLINE
17:09:03.243 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:09:03.244 (loader): elf appears to be for Teensy 4-Beta2 (IMXRT1062) (2031616 bytes)
17:09:03.244 (loader): elf binary data matches hex file
17:09:03.244 (loader): elf file is for Teensy 4-Beta2 (IMXRT1062)
17:09:03.244 (loader): begin operation
17:09:03.260 (loader): flash, block=0, bs=1024, auto=1
17:09:03.261 (loader): gauge old value = 0
17:09:03.264 (loader): flash, block=1, bs=1024, auto=1
17:09:03.394 (loader): gauge old value = 1
17:09:03.396 (loader): flash, block=2, bs=1024, auto=1
17:09:03.512 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:09:03.513 (ports 5): nothing new, skipping HID & Ports enum
17:09:03.664 (loader): gauge old value = 2
17:09:03.665 (loader): flash, block=3, bs=1024, auto=1
17:09:03.665 (loader): gauge old value = 3
17:09:03.665 (loader): flash, block=4, bs=1024, auto=1
17:09:03.666 (loader): gauge old value = 4
17:09:03.666 (loader): flash, block=5, bs=1024, auto=1
17:09:03.667 (loader): gauge old value = 5
17:09:03.668 (loader): flash, block=6, bs=1024, auto=1
17:09:03.669 (loader): gauge old value = 6
17:09:03.669 (loader): flash, block=7, bs=1024, auto=1
17:09:03.670 (loader): gauge old value = 7
17:09:03.671 (loader): flash, block=8, bs=1024, auto=1
17:09:03.672 (loader): gauge old value = 8
17:09:03.672 (loader): flash, block=9, bs=1024, auto=1
17:09:03.673 (loader): gauge old value = 9
17:09:03.674 (loader): flash, block=10, bs=1024, auto=1
17:09:03.675 (loader): gauge old value = 10
17:09:03.676 (loader): flash, block=11, bs=1024, auto=1
17:09:03.676 (loader): gauge old value = 11
17:09:03.678 (loader): flash, block=12, bs=1024, auto=1
17:09:03.678 (loader): gauge old value = 12
17:09:03.680 (loader): flash, block=13, bs=1024, auto=1
17:09:03.680 (loader): gauge old value = 13
17:09:03.681 (loader): flash, block=14, bs=1024, auto=1
17:09:03.682 (loader): gauge old value = 14
17:09:03.682 (loader): flash, block=15, bs=1024, auto=1
17:09:03.683 (loader): gauge old value = 15
17:09:03.689 (loader): sending reboot
17:09:03.690 (loader): begin wait_until_offline
17:09:03.707 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:09:03.708 (ports 5): remove: loc=usb:0/140000/0/7/2
17:09:03.708 (ports 5): usb_remove: usb:0/140000/0/7/2
17:09:03.708 (ports 5): nothing new, skipping HID & Ports enum
17:09:03.741 (loader): offline, waited 1
17:09:03.741 (loader): end operation, total time = 0.497 seconds
17:09:03.742 (loader): set background IMG_REBOOT_OK
17:09:03.743 (loader): redraw timer set, image 14 to show for 1200 ms
17:09:03.748 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:03.748 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:03.748 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:03.748 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:03.748 (loader): HID/win32: vid:046D pid:B01A ver:0003
17:09:03.748 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:03.748 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:09:03.982 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:09:03.983 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:09:03.983 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:09:03.983 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0279
17:09:03.983 (ports 5): found_usb_device, devinst=0000001b
17:09:03.983 (ports 5): add: loc=usb:0/140000/0/7/2, class=Ports, vid=16C0, pid=0483, ver=0279, serial=5878880, dev=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:09:03.983 (ports 5): comport_from_devinst_list attempt
17:09:03.983 (ports 5): found Ports in classguid_list at index=0
17:09:03.983 (ports 5): port COM32 found from devnode
17:09:03.983 (ports 5): found_usb_device complete
17:09:03.984 (ports 5): usb_add: usb:0/140000/0/7/2 COM32 (Teensy 4-Beta2) Serial
17:09:04.265 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:09:04.266 (ports 5): nothing new, skipping HID & Ports enum
17:09:04.764 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:09:04.765 (ports 5): nothing new, skipping HID & Ports enum
17:09:04.944 (loader): redraw, image 9
17:09:10.896 (loader): Verbose Info event
17:18:12.261 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:18:12.262 (ports 5): remove: loc=usb:0/140000/0/7/2
17:18:12.262 (ports 5): usb_remove: usb:0/140000/0/7/2
17:18:12.262 (ports 5): nothing new, skipping HID & Ports enum
17:18:12.312 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:18:12.312 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:18:12.312 (ports 5): nothing new, skipping HID & Ports enum
17:18:12.726 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:18:12.727 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:12.727 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:18:12.727 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0004
17:18:12.727 (ports 5): found_usb_device, devinst=0000001c
17:18:12.727 (ports 5): add: loc=usb:0/140000/0/7/2, class=HID, vid=16C0, pid=0478, ver=0004, serial=0008f870, dev=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:12.728 (ports 5): hiddev_from_devinst_list: iface=0
17:18:12.729 (ports 5): found_usb_device complete
17:18:12.731 (ports 5): usb_add: usb:0/140000/0/7/2 [no_device] (Teensy 4-Beta2) Bootloader
17:18:12.829 (loader): Device came online, code_size = 2031616
17:18:12.834 (loader): Board is: Teensy 4-Beta2 (IMXRT1062), version 0.04
17:18:12.844 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:18:12.849 (loader): set background IMG_ONLINE
17:18:12.859 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:18:12.864 (loader): elf appears to be for Teensy 4-Beta2 (IMXRT1062) (2031616 bytes)
17:18:12.868 (loader): elf binary data matches hex file
17:18:12.880 (loader): elf file is for Teensy 4-Beta2 (IMXRT1062)
17:18:12.887 (loader): begin operation
17:18:12.909 (loader): flash, block=0, bs=1024, auto=1
17:18:12.914 (loader): gauge old value = 0
17:18:12.920 (loader): flash, block=1, bs=1024, auto=1
17:18:13.045 (loader): gauge old value = 1
17:18:13.069 (loader): flash, block=2, bs=1024, auto=1
17:18:13.074 (loader): gauge old value = 2
17:18:13.078 (loader): flash, block=3, bs=1024, auto=1
17:18:13.082 (loader): gauge old value = 3
17:18:13.086 (loader): flash, block=4, bs=1024, auto=1
17:18:13.091 (loader): gauge old value = 4
17:18:13.095 (loader): flash, block=5, bs=1024, auto=1
17:18:13.100 (loader): gauge old value = 5
17:18:13.105 (loader): flash, block=6, bs=1024, auto=1
17:18:13.109 (loader): gauge old value = 6
17:18:13.113 (loader): flash, block=7, bs=1024, auto=1
17:18:13.117 (loader): gauge old value = 7
17:18:13.121 (loader): flash, block=8, bs=1024, auto=1
17:18:13.125 (loader): gauge old value = 8
17:18:13.128 (loader): flash, block=9, bs=1024, auto=1
17:18:13.132 (loader): gauge old value = 9
17:18:13.136 (loader): flash, block=10, bs=1024, auto=1
17:18:13.140 (loader): gauge old value = 10
17:18:13.145 (loader): flash, block=11, bs=1024, auto=1
17:18:13.148 (loader): gauge old value = 11
17:18:13.152 (loader): flash, block=12, bs=1024, auto=1
17:18:13.155 (loader): gauge old value = 12
17:18:13.160 (loader): flash, block=13, bs=1024, auto=1
17:18:13.164 (loader): gauge old value = 13
17:18:13.167 (loader): flash, block=14, bs=1024, auto=1
17:18:13.172 (loader): gauge old value = 14
17:18:13.177 (loader): flash, block=15, bs=1024, auto=1
17:18:13.180 (loader): gauge old value = 15
17:18:13.186 (loader): sending reboot
17:18:13.192 (loader): begin wait_until_offline
17:18:13.202 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:18:13.203 (ports 5): remove: loc=usb:0/140000/0/7/2
17:18:13.203 (ports 5): usb_remove: usb:0/140000/0/7/2
17:18:13.203 (ports 5): nothing new, skipping HID & Ports enum
17:18:13.246 (loader): offline, waited 1
17:18:13.250 (loader): end operation, total time = 0.358 seconds
17:18:13.255 (loader): set background IMG_REBOOT_OK
17:18:13.260 (loader): redraw timer set, image 14 to show for 1200 ms
17:18:13.331 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:13.335 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:13.340 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:13.344 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:13.348 (loader): HID/win32: vid:046D pid:B01A ver:0003
17:18:13.352 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:13.355 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:13.488 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:18:13.490 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:13.490 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:18:13.490 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0279
17:18:13.490 (ports 5): found_usb_device, devinst=0000001b
17:18:13.490 (ports 5): add: loc=usb:0/140000/0/7/2, class=Ports, vid=16C0, pid=0483, ver=0279, serial=5878880, dev=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:13.490 (ports 5): comport_from_devinst_list attempt
17:18:13.490 (ports 5): found Ports in classguid_list at index=0
17:18:13.490 (ports 5): port COM32 found from devnode
17:18:13.490 (ports 5): found_usb_device complete
17:18:13.492 (ports 5): usb_add: usb:0/140000/0/7/2 COM32 (Teensy 4-Beta2) Serial
17:18:14.068 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:18:14.068 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:18:14.069 (ports 5): nothing new, skipping HID & Ports enum
17:18:14.450 (loader): redraw, image 9
17:18:49.331 (loader): file changed
17:18:49.343 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:18:49.409 (post_compile 6): Begin, version=1.47-beta4, high-res time
17:18:49.410 (loader): remote connection 1532 opened
17:18:49.415 (post_compile 6): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)
17:18:49.415 (loader): remote cmd from 1532: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)"
17:18:49.423 (loader): remote cmd from 1532: "status"
17:18:49.429 (loader): remote cmd from 1532: "dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\"
17:18:49.430 (post_compile 6): Status: 1, 1, 0, 2, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:49.430 (post_compile 6): Sending command: dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\
17:18:49.434 (loader): remote cmd from 1532: "file:Blink.ino.hex"
17:18:49.434 (post_compile 6): Sending command: file:Blink.ino.hex
17:18:49.443 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:18:49.453 (loader): remote cmd from 1532: "status"
17:18:49.459 (post_compile 6): Status: 1, 1, 0, 2, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:49.459 (post_compile 6): Disconnect
17:18:49.473 (loader): remote connection 1532 closed
17:18:49.670 (post_compile 7): Begin, version=1.47-beta4, high-res time
17:18:49.671 (loader): remote connection 1536 opened
17:18:49.676 (loader): remote cmd from 1536: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)"
17:18:49.677 (post_compile 7): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)
17:18:49.681 (loader): remote cmd from 1536: "status"
17:18:49.691 (loader): remote cmd from 1536: "dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\"
17:18:49.692 (post_compile 7): Status: 1, 1, 0, 2, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:49.692 (post_compile 7): Sending command: dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\
17:18:49.695 (loader): remote cmd from 1536: "file:Blink.ino.hex"
17:18:49.696 (post_compile 7): Sending command: file:Blink.ino.hex
17:18:49.703 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:18:49.712 (loader): remote cmd from 1536: "status"
17:18:49.719 (post_compile 7): Status: 1, 1, 0, 2, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:49.719 (post_compile 7): Disconnect
17:18:49.731 (post_compile 8): Running teensy_reboot: "D:\arduino-1.8.9\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY40" "-port=usb:0/140000/0/7/2" "-portlabel=(null)" "-portprotocol=(null)"
17:18:49.731 (loader): remote connection 1536 closed
17:18:49.742 (loader): remote connection 1536 opened
17:18:49.764 (reboot 9): Begin, version=1.47-beta4, high-res time
17:18:49.764 (reboot 9): location = usb:0/140000/0/7/2
17:18:49.764 (reboot 9): portlabel = (null)
17:18:49.764 (reboot 9): portprotocol = (null)
17:18:49.764 (reboot 9): LoadLibrary cfgmgr32 ok
17:18:49.764 (reboot 9): LoadLibrary ntdll ok
17:18:49.765 (reboot 9): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:49.765 (reboot 9): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:18:49.765 (reboot 9): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0279
17:18:49.765 (reboot 9): found_usb_device, devinst=00000003
17:18:49.765 (reboot 9): add: loc=usb:0/140000/0/7/2, class=Ports, vid=16C0, pid=0483, ver=0279, serial=5878880, dev=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:49.765 (reboot 9): comport_from_devinst_list attempt
17:18:49.765 (reboot 9): found Ports in classguid_list at index=0
17:18:49.765 (reboot 9): port COM32 found from devnode
17:18:49.765 (reboot 9): found_usb_device complete
17:18:49.768 (loader): remote connection 1568 opened
17:18:49.772 (loader): remote cmd from 1568: "show:arduino_attempt_reboot"
17:18:49.773 (reboot 9): found Teensy Loader, version 1.47
17:18:49.773 (reboot 9): Sending command: show:arduino_attempt_reboot
17:18:49.775 (loader): got request to show arduino rebooting message
17:18:49.781 (loader): remote cmd from 1568: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_reboot)"
17:18:49.782 (reboot 9): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_reboot)
17:18:49.787 (loader): remote cmd from 1568: "status"
17:18:49.794 (reboot 9): Status: 1, 1, 0, 2, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:49.794 (reboot 9): do_reset (serial) COM32
17:18:49.805 (loader): remote cmd from 1568: "status"
17:18:49.811 (reboot 9): Status: 1, 1, 0, 2, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:49.811 (reboot 9): status read, retry 0
17:18:49.868 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:18:49.871 (ports 5): remove: loc=usb:0/140000/0/7/2
17:18:49.871 (ports 5): usb_remove: usb:0/140000/0/7/2
17:18:49.871 (ports 5): nothing new, skipping HID & Ports enum
17:18:49.913 (loader): remote cmd from 1568: "status"
17:18:49.920 (reboot 9): Status: 1, 1, 0, 2, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:49.920 (reboot 9): status read, retry 1
17:18:50.021 (loader): remote cmd from 1568: "status"
17:18:50.038 (reboot 9): Status: 1, 1, 0, 2, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:50.038 (reboot 9): status read, retry 2
17:18:50.073 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:18:50.074 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:50.074 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:18:50.074 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0004
17:18:50.074 (ports 5): found_usb_device, devinst=0000001c
17:18:50.074 (ports 5): add: loc=usb:0/140000/0/7/2, class=HID, vid=16C0, pid=0478, ver=0004, serial=0008f870, dev=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:50.074 (ports 5): hiddev_from_devinst_list: iface=0
17:18:50.074 (ports 5): found_usb_device complete
17:18:50.075 (ports 5): usb_add: usb:0/140000/0/7/2 [no_device] (Teensy 4-Beta2) Bootloader
17:18:50.148 (loader): remote cmd from 1568: "status"
17:18:50.158 (loader): Device came online, code_size = 2031616
17:18:50.163 (loader): Board is: Teensy 4-Beta2 (IMXRT1062), version 0.04
17:18:50.172 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:18:50.177 (loader): set background IMG_ONLINE
17:18:50.186 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:18:50.191 (loader): elf appears to be for Teensy 4-Beta2 (IMXRT1062) (2031616 bytes)
17:18:50.195 (loader): elf binary data matches hex file
17:18:50.199 (loader): elf file is for Teensy 4-Beta2 (IMXRT1062)
17:18:50.207 (loader): begin operation
17:18:50.226 (reboot 9): Status: 1, 1, 1, 3, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:50.232 (loader): flash, block=0, bs=1024, auto=1
17:18:50.237 (loader): gauge old value = 0
17:18:50.244 (loader): flash, block=1, bs=1024, auto=1
17:18:50.367 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:18:50.367 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:18:50.368 (loader): gauge old value = 1
17:18:50.370 (ports 5): hid, found devinst=0000001D
17:18:50.370 (ports 5): hid, path=\\?\hid#vid_16c0&pid_0478#7&283234e0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
17:18:50.370 (ports 5): hid, opened handle
17:18:50.370 (ports 5): devinst=0000001D, location=usb:0/140000/0/7/2
17:18:50.370 (ports 5): vid=16C0, pid=0478, ver=0004, usepage=FF9C, use=0024
17:18:50.370 (ports 5): devpath=\\?\hid#vid_16c0&pid_0478#7&283234e0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
17:18:50.370 (ports 5): usb_add: usb:0/140000/0/7/2 hid#vid_16c0&pid_0478 (Teensy 4-Beta2) Bootloader
17:18:50.377 (loader): remote cmd from 1568: "status"
17:18:50.386 (reboot 9): Status: 1, 1, 1, 3, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:50.407 (loader): flash, block=2, bs=1024, auto=1
17:18:50.411 (loader): gauge old value = 2
17:18:50.417 (loader): flash, block=3, bs=1024, auto=1
17:18:50.421 (loader): gauge old value = 3
17:18:50.425 (loader): flash, block=4, bs=1024, auto=1
17:18:50.428 (loader): gauge old value = 4
17:18:50.432 (loader): flash, block=5, bs=1024, auto=1
17:18:50.437 (loader): gauge old value = 5
17:18:50.440 (loader): flash, block=6, bs=1024, auto=1
17:18:50.444 (loader): gauge old value = 6
17:18:50.448 (loader): flash, block=7, bs=1024, auto=1
17:18:50.454 (loader): gauge old value = 7
17:18:50.459 (loader): flash, block=8, bs=1024, auto=1
17:18:50.462 (loader): gauge old value = 8
17:18:50.466 (loader): flash, block=9, bs=1024, auto=1
17:18:50.471 (loader): gauge old value = 9
17:18:50.474 (loader): flash, block=10, bs=1024, auto=1
17:18:50.478 (loader): gauge old value = 10
17:18:50.481 (loader): flash, block=11, bs=1024, auto=1
17:18:50.485 (loader): gauge old value = 11
17:18:50.489 (loader): flash, block=12, bs=1024, auto=1
17:18:50.494 (loader): gauge old value = 12
17:18:50.498 (loader): flash, block=13, bs=1024, auto=1
17:18:50.509 (loader): gauge old value = 13
17:18:50.512 (loader): flash, block=14, bs=1024, auto=1
17:18:50.515 (loader): gauge old value = 14
17:18:50.525 (loader): flash, block=15, bs=1024, auto=1
17:18:50.528 (loader): gauge old value = 15
17:18:50.537 (loader): remote cmd from 1568: "status"
17:18:50.543 (loader): sending reboot
17:18:50.544 (reboot 9): Status: 1, 1, 1, 3, 0, 2, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:50.547 (loader): begin wait_until_offline
17:18:50.551 (loader): offline, waited 0
17:18:50.553 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:18:50.554 (ports 5): remove: loc=usb:0/140000/0/7/2
17:18:50.554 (ports 5): usb_remove: usb:0/140000/0/7/2
17:18:50.554 (ports 5): nothing new, skipping HID & Ports enum
17:18:50.558 (loader): end operation, total time = 0.347 seconds
17:18:50.563 (loader): set background IMG_REBOOT_OK
17:18:50.574 (loader): redraw timer set, image 14 to show for 1200 ms
17:18:50.618 (loader): remote cmd from 1568: "status"
17:18:50.628 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:50.632 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:50.636 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:50.649 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:50.659 (loader): HID/win32: vid:046D pid:B01A ver:0003
17:18:50.665 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:50.672 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:18:50.682 (reboot 9): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:18:50.682 (reboot 9): status read, retry 3
17:18:50.682 (reboot 9): Success
17:18:50.682 (reboot 9): Disconnect
17:18:50.705 (loader): remote connection 1568 closed
17:18:50.711 (loader): remote connection 1536 closed
17:18:50.824 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:18:50.825 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:50.825 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:18:50.825 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0279
17:18:50.825 (ports 5): found_usb_device, devinst=0000001b
17:18:50.825 (ports 5): add: loc=usb:0/140000/0/7/2, class=Ports, vid=16C0, pid=0483, ver=0279, serial=5878880, dev=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:18:50.825 (ports 5): comport_from_devinst_list attempt
17:18:50.825 (ports 5): found Ports in classguid_list at index=0
17:18:50.825 (ports 5): port COM32 found from devnode
17:18:50.825 (ports 5): found_usb_device complete
17:18:50.826 (ports 5): usb_add: usb:0/140000/0/7/2 COM32 (Teensy 4-Beta2) Serial
17:18:51.120 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:18:51.120 (ports 5): nothing new, skipping HID & Ports enum
17:18:51.370 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:18:51.370 (ports 5): nothing new, skipping HID & Ports enum
17:18:51.762 (loader): redraw, image 9
17:18:53.138 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:18:53.141 (ports 5): nothing new, skipping HID & Ports enum
17:21:01.016 (post_compile 10): Begin, version=1.47-beta4, high-res time
17:21:01.018 (loader): remote connection 1564 opened
17:21:01.022 (loader): remote cmd from 1564: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)"
17:21:01.022 (post_compile 10): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)
17:21:01.026 (loader): remote cmd from 1564: "status"
17:21:01.029 (loader): file changed
17:21:01.039 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:21:01.046 (post_compile 10): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.046 (post_compile 10): Sending command: dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\
17:21:01.050 (loader): remote cmd from 1564: "dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\"
17:21:01.054 (post_compile 10): Sending command: file:Blink.ino.hex
17:21:01.055 (loader): remote cmd from 1564: "file:Blink.ino.hex"
17:21:01.063 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:21:01.075 (loader): remote cmd from 1564: "status"
17:21:01.081 (post_compile 10): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.081 (post_compile 10): Disconnect
17:21:01.097 (loader): remote connection 1564 closed
17:21:01.286 (post_compile 11): Begin, version=1.47-beta4, high-res time
17:21:01.288 (loader): remote connection 1604 opened
17:21:01.293 (post_compile 11): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)
17:21:01.293 (loader): remote cmd from 1604: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)"
17:21:01.297 (loader): remote cmd from 1604: "status"
17:21:01.303 (loader): remote cmd from 1604: "dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\"
17:21:01.304 (post_compile 11): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.304 (post_compile 11): Sending command: dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\
17:21:01.311 (loader): remote cmd from 1604: "file:Blink.ino.hex"
17:21:01.311 (post_compile 11): Sending command: file:Blink.ino.hex
17:21:01.318 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:21:01.327 (loader): remote cmd from 1604: "status"
17:21:01.332 (post_compile 11): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.332 (post_compile 11): Disconnect
17:21:01.344 (post_compile 12): Running teensy_reboot: "D:\arduino-1.8.9\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY40" "-port=usb:0/140000/0/7/2" "-portlabel=hid#vid_16c0&pid_0478 Bootloader" "-portprotocol=Teensy"
17:21:01.348 (loader): remote connection 1604 closed
17:21:01.357 (loader): remote connection 1604 opened
17:21:01.377 (reboot 13): Begin, version=1.47-beta4, high-res time
17:21:01.377 (reboot 13): location = usb:0/140000/0/7/2
17:21:01.377 (reboot 13): portlabel = hid#vid_16c0&pid_0478 Bootloader
17:21:01.377 (reboot 13): portprotocol = Teensy
17:21:01.377 (reboot 13): Only location usb:0/140000/0/7/2 will be tried
17:21:01.377 (reboot 13): LoadLibrary cfgmgr32 ok
17:21:01.377 (reboot 13): LoadLibrary ntdll ok
17:21:01.378 (reboot 13): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:01.378 (reboot 13): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:21:01.378 (reboot 13): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0279
17:21:01.378 (reboot 13): found_usb_device, devinst=00000003
17:21:01.378 (reboot 13): add: loc=usb:0/140000/0/7/2, class=Ports, vid=16C0, pid=0483, ver=0279, serial=5878880, dev=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:01.378 (reboot 13): comport_from_devinst_list attempt
17:21:01.378 (reboot 13): found Ports in classguid_list at index=0
17:21:01.378 (reboot 13): port COM32 found from devnode
17:21:01.378 (reboot 13): found_usb_device complete
17:21:01.384 (loader): remote connection 1564 opened
17:21:01.393 (loader): remote cmd from 1564: "show:arduino_attempt_reboot"
17:21:01.393 (reboot 13): found Teensy Loader, version 1.47
17:21:01.393 (reboot 13): Sending command: show:arduino_attempt_reboot
17:21:01.397 (loader): got request to show arduino rebooting message
17:21:01.403 (reboot 13): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_reboot)
17:21:01.404 (loader): remote cmd from 1564: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_reboot)"
17:21:01.408 (loader): remote cmd from 1564: "status"
17:21:01.413 (reboot 13): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.413 (reboot 13): do_reset (serial) COM32
17:21:01.426 (loader): remote cmd from 1564: "status"
17:21:01.431 (reboot 13): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.431 (reboot 13): status read, retry 0
17:21:01.485 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:21:01.486 (ports 5): remove: loc=usb:0/140000/0/7/2
17:21:01.486 (ports 5): usb_remove: usb:0/140000/0/7/2
17:21:01.486 (ports 5): nothing new, skipping HID & Ports enum
17:21:01.532 (loader): remote cmd from 1564: "status"
17:21:01.540 (reboot 13): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.540 (reboot 13): status read, retry 1
17:21:01.641 (loader): remote cmd from 1564: "status"
17:21:01.664 (reboot 13): Status: 1, 1, 0, 3, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.664 (reboot 13): status read, retry 2
17:21:01.692 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:21:01.692 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:01.692 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:21:01.692 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0004
17:21:01.692 (ports 5): found_usb_device, devinst=0000001c
17:21:01.692 (ports 5): add: loc=usb:0/140000/0/7/2, class=HID, vid=16C0, pid=0478, ver=0004, serial=0008f870, dev=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:01.692 (ports 5): hiddev_from_devinst_list: iface=0
17:21:01.693 (ports 5): found_usb_device complete
17:21:01.694 (ports 5): usb_add: usb:0/140000/0/7/2 [no_device] (Teensy 4-Beta2) Bootloader
17:21:01.764 (loader): remote cmd from 1564: "status"
17:21:01.775 (loader): Device came online, code_size = 2031616
17:21:01.779 (loader): Board is: Teensy 4-Beta2 (IMXRT1062), version 0.04
17:21:01.787 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:21:01.793 (loader): set background IMG_ONLINE
17:21:01.801 (loader): File "Blink.ino.hex". 15444 bytes, 1% used
17:21:01.807 (loader): elf appears to be for Teensy 4-Beta2 (IMXRT1062) (2031616 bytes)
17:21:01.812 (loader): elf binary data matches hex file
17:21:01.816 (loader): elf file is for Teensy 4-Beta2 (IMXRT1062)
17:21:01.820 (loader): begin operation
17:21:01.834 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:21:01.834 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:21:01.835 (ports 5): hid, found devinst=0000001D
17:21:01.835 (ports 5): hid, path=\\?\hid#vid_16c0&pid_0478#7&283234e0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
17:21:01.835 (ports 5): hid, opened handle
17:21:01.835 (ports 5): devinst=0000001D, location=usb:0/140000/0/7/2
17:21:01.835 (ports 5): vid=16C0, pid=0478, ver=0004, usepage=FF9C, use=0024
17:21:01.835 (ports 5): devpath=\\?\hid#vid_16c0&pid_0478#7&283234e0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
17:21:01.836 (ports 5): usb_add: usb:0/140000/0/7/2 hid#vid_16c0&pid_0478 (Teensy 4-Beta2) Bootloader
17:21:01.843 (reboot 13): Status: 1, 1, 1, 4, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.896 (loader): remote cmd from 1564: "status"
17:21:01.906 (reboot 13): Status: 1, 1, 1, 4, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:01.912 (loader): flash, block=0, bs=1024, auto=1
17:21:01.916 (loader): gauge old value = 0
17:21:01.923 (loader): flash, block=1, bs=1024, auto=1
17:21:02.048 (loader): gauge old value = 1
17:21:02.057 (loader): remote cmd from 1564: "status"
17:21:02.067 (reboot 13): Status: 1, 1, 1, 4, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:02.068 (loader): flash, block=2, bs=1024, auto=1
17:21:02.073 (loader): gauge old value = 2
17:21:02.076 (loader): flash, block=3, bs=1024, auto=1
17:21:02.082 (loader): gauge old value = 3
17:21:02.085 (loader): flash, block=4, bs=1024, auto=1
17:21:02.089 (loader): gauge old value = 4
17:21:02.093 (loader): flash, block=5, bs=1024, auto=1
17:21:02.097 (loader): gauge old value = 5
17:21:02.101 (loader): flash, block=6, bs=1024, auto=1
17:21:02.105 (loader): gauge old value = 6
17:21:02.111 (loader): flash, block=7, bs=1024, auto=1
17:21:02.116 (loader): gauge old value = 7
17:21:02.120 (loader): flash, block=8, bs=1024, auto=1
17:21:02.129 (loader): gauge old value = 8
17:21:02.135 (loader): remote cmd from 1564: "status"
17:21:02.140 (loader): flash, block=9, bs=1024, auto=1
17:21:02.140 (reboot 13): Status: 1, 1, 1, 4, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:02.145 (loader): gauge old value = 9
17:21:02.148 (loader): flash, block=10, bs=1024, auto=1
17:21:02.152 (loader): gauge old value = 10
17:21:02.155 (loader): flash, block=11, bs=1024, auto=1
17:21:02.158 (loader): gauge old value = 11
17:21:02.165 (loader): flash, block=12, bs=1024, auto=1
17:21:02.168 (loader): gauge old value = 12
17:21:02.172 (loader): flash, block=13, bs=1024, auto=1
17:21:02.176 (loader): gauge old value = 13
17:21:02.180 (loader): flash, block=14, bs=1024, auto=1
17:21:02.183 (loader): gauge old value = 14
17:21:02.198 (loader): flash, block=15, bs=1024, auto=1
17:21:02.202 (loader): gauge old value = 15
17:21:02.234 (loader): remote cmd from 1564: "status"
17:21:02.243 (loader): sending reboot
17:21:02.244 (reboot 13): Status: 1, 1, 1, 4, 0, 2, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:02.254 (loader): begin wait_until_offline
17:21:02.259 (loader): offline, waited 0
17:21:02.261 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:21:02.262 (ports 5): remove: loc=usb:0/140000/0/7/2
17:21:02.262 (ports 5): usb_remove: usb:0/140000/0/7/2
17:21:02.262 (ports 5): nothing new, skipping HID & Ports enum
17:21:02.265 (loader): end operation, total time = 0.439 seconds
17:21:02.269 (loader): set background IMG_REBOOT_OK
17:21:02.279 (loader): redraw timer set, image 14 to show for 1200 ms
17:21:02.315 (loader): remote cmd from 1564: "status"
17:21:02.351 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:02.357 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:02.361 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:02.368 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:02.373 (loader): HID/win32: vid:046D pid:B01A ver:0003
17:21:02.383 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:02.404 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:02.410 (reboot 13): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:02.410 (reboot 13): status read, retry 3
17:21:02.410 (reboot 13): Success
17:21:02.410 (reboot 13): Disconnect
17:21:02.463 (loader): remote connection 1564 closed
17:21:02.477 (loader): remote connection 1604 closed
17:21:02.550 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:21:02.551 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:02.551 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:21:02.551 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0279
17:21:02.551 (ports 5): found_usb_device, devinst=0000001b
17:21:02.551 (ports 5): add: loc=usb:0/140000/0/7/2, class=Ports, vid=16C0, pid=0483, ver=0279, serial=5878880, dev=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:02.551 (ports 5): comport_from_devinst_list attempt
17:21:02.551 (ports 5): found Ports in classguid_list at index=0
17:21:02.551 (ports 5): port COM32 found from devnode
17:21:02.551 (ports 5): found_usb_device complete
17:21:02.552 (ports 5): usb_add: usb:0/140000/0/7/2 COM32 (Teensy 4-Beta2) Serial
17:21:02.833 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:21:02.833 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:21:02.834 (ports 5): nothing new, skipping HID & Ports enum
17:21:03.485 (loader): redraw, image 9
17:21:50.846 (post_compile 14): Begin, version=1.47-beta4, high-res time
17:21:50.848 (loader): remote connection 1640 opened
17:21:50.852 (loader): remote cmd from 1640: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)"
17:21:50.852 (post_compile 14): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)
17:21:50.860 (loader): remote cmd from 1640: "status"
17:21:50.869 (loader): remote cmd from 1640: "dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\"
17:21:50.869 (post_compile 14): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_79524\, Blink.ino.hex
17:21:50.869 (post_compile 14): Sending command: dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\
17:21:50.874 (loader): remote cmd from 1640: "file:uncannyEyes.ino.hex"
17:21:50.874 (post_compile 14): Sending command: file:uncannyEyes.ino.hex
17:21:50.906 (loader): File "uncannyEyes.ino.hex". 197012 bytes, 10% used
17:21:50.916 (loader): remote cmd from 1640: "status"
17:21:50.923 (post_compile 14): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:50.923 (post_compile 14): Disconnect
17:21:50.945 (loader): remote connection 1640 closed
17:21:51.230 (post_compile 15): Begin, version=1.47-beta4, high-res time
17:21:51.232 (loader): remote connection 1640 opened
17:21:51.238 (loader): remote cmd from 1640: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)"
17:21:51.238 (post_compile 15): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_post_compile)
17:21:51.242 (loader): remote cmd from 1640: "status"
17:21:51.248 (loader): remote cmd from 1640: "dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\"
17:21:51.248 (post_compile 15): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:51.248 (post_compile 15): Sending command: dir:C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\
17:21:51.255 (loader): remote cmd from 1640: "file:uncannyEyes.ino.hex"
17:21:51.255 (post_compile 15): Sending command: file:uncannyEyes.ino.hex
17:21:51.284 (loader): File "uncannyEyes.ino.hex". 197012 bytes, 10% used
17:21:51.297 (loader): remote cmd from 1640: "status"
17:21:51.303 (post_compile 15): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:51.303 (post_compile 15): Disconnect
17:21:51.315 (post_compile 16): Running teensy_reboot: "D:\arduino-1.8.9\hardware\teensy\..\tools\teensy_reboot.exe" teensy_reboot.exe "-board=TEENSY40" "-port=usb:0/140000/0/7/2" "-portlabel=hid#vid_16c0&pid_0478 Bootloader" "-portprotocol=Teensy"
17:21:51.322 (loader): remote connection 1640 closed
17:21:51.331 (loader): remote connection 1640 opened
17:21:51.350 (reboot 17): Begin, version=1.47-beta4, high-res time
17:21:51.350 (reboot 17): location = usb:0/140000/0/7/2
17:21:51.350 (reboot 17): portlabel = hid#vid_16c0&pid_0478 Bootloader
17:21:51.350 (reboot 17): portprotocol = Teensy
17:21:51.350 (reboot 17): Only location usb:0/140000/0/7/2 will be tried
17:21:51.350 (reboot 17): LoadLibrary cfgmgr32 ok
17:21:51.350 (reboot 17): LoadLibrary ntdll ok
17:21:51.351 (reboot 17): found_usb_device, id=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:51.351 (reboot 17): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:21:51.351 (reboot 17): found_usb_device, hwid=USB\VID_16C0&PID_0483&REV_0279
17:21:51.351 (reboot 17): found_usb_device, devinst=00000003
17:21:51.351 (reboot 17): add: loc=usb:0/140000/0/7/2, class=Ports, vid=16C0, pid=0483, ver=0279, serial=5878880, dev=\\?\usb#vid_16c0&pid_0483#5878880#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:51.351 (reboot 17): comport_from_devinst_list attempt
17:21:51.351 (reboot 17): found Ports in classguid_list at index=0
17:21:51.351 (reboot 17): port COM32 found from devnode
17:21:51.351 (reboot 17): found_usb_device complete
17:21:51.355 (loader): remote connection 1620 opened
17:21:51.367 (loader): remote cmd from 1620: "show:arduino_attempt_reboot"
17:21:51.368 (reboot 17): found Teensy Loader, version 1.47
17:21:51.368 (reboot 17): Sending command: show:arduino_attempt_reboot
17:21:51.372 (loader): got request to show arduino rebooting message
17:21:51.379 (reboot 17): Sending command: comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_reboot)
17:21:51.379 (loader): remote cmd from 1620: "comment: Teensyduino 1.47-beta4 - WINDOWS (teensy_reboot)"
17:21:51.383 (loader): remote cmd from 1620: "status"
17:21:51.389 (reboot 17): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:51.389 (reboot 17): do_reset (serial) COM32
17:21:51.402 (loader): remote cmd from 1620: "status"
17:21:51.418 (reboot 17): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:51.418 (reboot 17): status read, retry 0
17:21:51.489 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:21:51.490 (ports 5): remove: loc=usb:0/140000/0/7/2
17:21:51.490 (ports 5): usb_remove: usb:0/140000/0/7/2
17:21:51.490 (ports 5): nothing new, skipping HID & Ports enum
17:21:51.519 (loader): remote cmd from 1620: "status"
17:21:51.526 (reboot 17): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:51.526 (reboot 17): status read, retry 1
17:21:51.627 (loader): remote cmd from 1620: "status"
17:21:51.647 (reboot 17): Status: 1, 1, 0, 4, 0, 0, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:51.647 (reboot 17): status read, retry 2
17:21:51.682 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:21:51.683 (ports 5): found_usb_device, id=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:51.683 (ports 5): found_usb_device, loc=usb:0/140000/0/7/2 Port_#0002.Hub_#0003
17:21:51.683 (ports 5): found_usb_device, hwid=USB\VID_16C0&PID_0478&REV_0004
17:21:51.683 (ports 5): found_usb_device, devinst=0000001c
17:21:51.683 (ports 5): add: loc=usb:0/140000/0/7/2, class=HID, vid=16C0, pid=0478, ver=0004, serial=0008f870, dev=\\?\usb#vid_16c0&pid_0478#0008f870#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
17:21:51.683 (ports 5): hiddev_from_devinst_list: iface=0
17:21:51.685 (ports 5): found_usb_device complete
17:21:51.686 (ports 5): hid, found devinst=0000001D
17:21:51.686 (ports 5): hid, path=\\?\hid#vid_16c0&pid_0478#7&283234e0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
17:21:51.686 (ports 5): hid, opened handle
17:21:51.686 (ports 5): devinst=0000001D, location=usb:0/140000/0/7/2
17:21:51.686 (ports 5): vid=16C0, pid=0478, ver=0004, usepage=FF9C, use=0024
17:21:51.686 (ports 5): devpath=\\?\hid#vid_16c0&pid_0478#7&283234e0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
17:21:51.686 (ports 5): usb_add: usb:0/140000/0/7/2 hid#vid_16c0&pid_0478 (Teensy 4-Beta2) Bootloader
17:21:51.781 (loader): remote cmd from 1620: "status"
17:21:51.790 (loader): Device came online, code_size = 2031616
17:21:51.795 (loader): Board is: Teensy 4-Beta2 (IMXRT1062), version 0.04
17:21:51.824 (loader): File "uncannyEyes.ino.hex". 197012 bytes, 10% used
17:21:51.830 (loader): set background IMG_ONLINE
17:21:51.862 (loader): File "uncannyEyes.ino.hex". 197012 bytes, 10% used
17:21:51.868 (loader): elf appears to be for Teensy 4-Beta2 (IMXRT1062) (2031616 bytes)
17:21:51.872 (loader): elf binary data matches hex file
17:21:51.877 (loader): elf file is for Teensy 4-Beta2 (IMXRT1062)
17:21:51.890 (loader): begin operation
17:21:51.908 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:21:51.908 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:21:51.909 (ports 5): nothing new, skipping HID & Ports enum
17:21:51.909 (reboot 17): Status: 1, 1, 1, 5, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:51.938 (loader): flash, block=0, bs=1024, auto=1
17:21:51.943 (loader): gauge old value = 0
17:21:51.951 (loader): flash, block=1, bs=1024, auto=1
17:21:52.074 (loader): gauge old value = 1
17:21:52.087 (loader): remote cmd from 1620: "status"
17:21:52.091 (loader): flash, block=2, bs=1024, auto=1
17:21:52.091 (reboot 17): Status: 1, 1, 1, 5, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:52.096 (loader): gauge old value = 2
17:21:52.099 (loader): flash, block=3, bs=1024, auto=1
17:21:52.103 (loader): gauge old value = 3
17:21:52.107 (loader): flash, block=4, bs=1024, auto=1
17:21:52.113 (loader): gauge old value = 4
17:21:52.120 (loader): flash, block=5, bs=1024, auto=1
17:21:52.124 (loader): gauge old value = 5
17:21:52.128 (loader): flash, block=6, bs=1024, auto=1
17:21:52.133 (loader): gauge old value = 6
17:21:52.143 (loader): flash, block=7, bs=1024, auto=1
17:21:52.147 (loader): gauge old value = 7
17:21:52.155 (loader): flash, block=8, bs=1024, auto=1
17:21:52.159 (loader): gauge old value = 8
17:21:52.168 (loader): flash, block=9, bs=1024, auto=1
17:21:52.173 (loader): gauge old value = 9
17:21:52.177 (loader): remote cmd from 1620: "status"
17:21:52.182 (loader): flash, block=10, bs=1024, auto=1
17:21:52.182 (reboot 17): Status: 1, 1, 1, 5, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:52.186 (loader): gauge old value = 10
17:21:52.189 (loader): flash, block=11, bs=1024, auto=1
17:21:52.195 (loader): gauge old value = 11
17:21:52.199 (loader): flash, block=12, bs=1024, auto=1
17:21:52.205 (loader): gauge old value = 12
17:21:52.211 (loader): flash, block=13, bs=1024, auto=1
17:21:52.218 (loader): gauge old value = 13
17:21:52.224 (loader): flash, block=14, bs=1024, auto=1
17:21:52.233 (loader): gauge old value = 14
17:21:52.238 (loader): flash, block=15, bs=1024, auto=1
17:21:52.242 (loader): gauge old value = 15
17:21:52.246 (loader): flash, block=16, bs=1024, auto=1
17:21:52.254 (loader): gauge old value = 16
17:21:52.260 (loader): flash, block=17, bs=1024, auto=1
17:21:52.265 (loader): gauge old value = 17
17:21:52.270 (loader): flash, block=18, bs=1024, auto=1
17:21:52.275 (loader): gauge old value = 18
17:21:52.281 (loader): flash, block=19, bs=1024, auto=1
17:21:52.286 (loader): gauge old value = 19
17:21:52.293 (loader): flash, block=20, bs=1024, auto=1
17:21:52.302 (loader): gauge old value = 20
17:21:52.306 (loader): flash, block=21, bs=1024, auto=1
17:21:52.313 (loader): gauge old value = 21
17:21:52.323 (loader): flash, block=22, bs=1024, auto=1
17:21:52.328 (loader): gauge old value = 22
17:21:52.333 (loader): flash, block=23, bs=1024, auto=1
17:21:52.337 (loader): gauge old value = 23
17:21:52.341 (loader): flash, block=24, bs=1024, auto=1
17:21:52.346 (loader): gauge old value = 24
17:21:52.350 (loader): flash, block=25, bs=1024, auto=1
17:21:52.355 (loader): gauge old value = 25
17:21:52.359 (loader): flash, block=26, bs=1024, auto=1
17:21:52.363 (loader): gauge old value = 26
17:21:52.369 (loader): flash, block=27, bs=1024, auto=1
17:21:52.376 (loader): gauge old value = 27
17:21:52.380 (loader): flash, block=28, bs=1024, auto=1
17:21:52.385 (loader): gauge old value = 28
17:21:52.390 (loader): flash, block=29, bs=1024, auto=1
17:21:52.395 (loader): gauge old value = 29
17:21:52.400 (loader): flash, block=30, bs=1024, auto=1
17:21:52.405 (loader): gauge old value = 30
17:21:52.409 (loader): flash, block=31, bs=1024, auto=1
17:21:52.415 (loader): gauge old value = 31
17:21:52.422 (loader): remote cmd from 1620: "status"
17:21:52.427 (loader): flash, block=32, bs=1024, auto=1
17:21:52.428 (reboot 17): Status: 1, 1, 1, 5, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:52.431 (loader): gauge old value = 32
17:21:52.439 (loader): flash, block=33, bs=1024, auto=1
17:21:52.444 (loader): gauge old value = 33
17:21:52.454 (loader): flash, block=34, bs=1024, auto=1
17:21:52.461 (loader): gauge old value = 34
17:21:52.466 (loader): flash, block=35, bs=1024, auto=1
17:21:52.470 (loader): gauge old value = 35
17:21:52.474 (loader): flash, block=36, bs=1024, auto=1
17:21:52.478 (loader): gauge old value = 36
17:21:52.483 (loader): flash, block=37, bs=1024, auto=1
17:21:52.487 (loader): gauge old value = 37
17:21:52.491 (loader): flash, block=38, bs=1024, auto=1
17:21:52.495 (loader): gauge old value = 38
17:21:52.499 (loader): flash, block=39, bs=1024, auto=1
17:21:52.503 (loader): gauge old value = 39
17:21:52.507 (loader): flash, block=40, bs=1024, auto=1
17:21:52.511 (loader): gauge old value = 40
17:21:52.515 (loader): flash, block=41, bs=1024, auto=1
17:21:52.519 (loader): gauge old value = 41
17:21:52.523 (loader): flash, block=42, bs=1024, auto=1
17:21:52.527 (loader): gauge old value = 42
17:21:52.532 (loader): flash, block=43, bs=1024, auto=1
17:21:52.536 (loader): gauge old value = 43
17:21:52.539 (loader): flash, block=44, bs=1024, auto=1
17:21:52.543 (loader): gauge old value = 44
17:21:52.546 (loader): flash, block=45, bs=1024, auto=1
17:21:52.550 (loader): gauge old value = 45
17:21:52.554 (loader): flash, block=46, bs=1024, auto=1
17:21:52.558 (loader): gauge old value = 46
17:21:52.561 (loader): flash, block=47, bs=1024, auto=1
17:21:52.564 (loader): gauge old value = 47
17:21:52.568 (loader): flash, block=48, bs=1024, auto=1
17:21:52.571 (loader): gauge old value = 48
17:21:52.574 (loader): flash, block=49, bs=1024, auto=1
17:21:52.579 (loader): gauge old value = 49
17:21:52.582 (loader): flash, block=50, bs=1024, auto=1
17:21:52.586 (loader): gauge old value = 50
17:21:52.590 (loader): flash, block=51, bs=1024, auto=1
17:21:52.593 (loader): gauge old value = 51
17:21:52.600 (loader): flash, block=52, bs=1024, auto=1
17:21:52.604 (loader): gauge old value = 52
17:21:52.607 (loader): flash, block=53, bs=1024, auto=1
17:21:52.611 (loader): gauge old value = 53
17:21:52.615 (loader): flash, block=54, bs=1024, auto=1
17:21:52.619 (loader): gauge old value = 54
17:21:52.623 (loader): flash, block=55, bs=1024, auto=1
17:21:52.628 (loader): gauge old value = 55
17:21:52.632 (loader): flash, block=56, bs=1024, auto=1
17:21:52.635 (loader): gauge old value = 56
17:21:52.640 (loader): flash, block=57, bs=1024, auto=1
17:21:52.644 (loader): gauge old value = 57
17:21:52.650 (loader): flash, block=58, bs=1024, auto=1
17:21:52.654 (loader): gauge old value = 58
17:21:52.657 (loader): flash, block=59, bs=1024, auto=1
17:21:52.661 (loader): gauge old value = 59
17:21:52.665 (loader): flash, block=60, bs=1024, auto=1
17:21:52.668 (loader): gauge old value = 60
17:21:52.672 (loader): flash, block=61, bs=1024, auto=1
17:21:52.676 (loader): gauge old value = 61
17:21:52.680 (loader): remote cmd from 1620: "status"
17:21:52.685 (loader): flash, block=62, bs=1024, auto=1
17:21:52.685 (reboot 17): Status: 1, 1, 1, 5, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:52.690 (loader): gauge old value = 62
17:21:52.695 (loader): flash, block=63, bs=1024, auto=1
17:21:52.702 (loader): gauge old value = 63
17:21:52.707 (loader): flash, block=64, bs=1024, auto=1
17:21:52.715 (loader): gauge old value = 64
17:21:52.721 (loader): flash, block=65, bs=1024, auto=1
17:21:52.745 (loader): gauge old value = 65
17:21:52.750 (loader): flash, block=66, bs=1024, auto=1
17:21:52.755 (loader): gauge old value = 66
17:21:52.758 (loader): flash, block=67, bs=1024, auto=1
17:21:52.763 (loader): gauge old value = 67
17:21:52.767 (loader): flash, block=68, bs=1024, auto=1
17:21:52.772 (loader): gauge old value = 68
17:21:52.776 (loader): flash, block=69, bs=1024, auto=1
17:21:52.781 (loader): gauge old value = 69
17:21:52.785 (loader): flash, block=70, bs=1024, auto=1
17:21:52.789 (loader): gauge old value = 70
17:21:52.794 (loader): flash, block=71, bs=1024, auto=1
17:21:52.799 (loader): gauge old value = 71
17:21:52.809 (loader): flash, block=72, bs=1024, auto=1
17:21:52.814 (loader): gauge old value = 72
17:21:52.818 (loader): flash, block=73, bs=1024, auto=1
17:21:52.826 (loader): gauge old value = 73
17:21:52.830 (loader): flash, block=74, bs=1024, auto=1
17:21:52.835 (loader): gauge old value = 74
17:21:52.837 (loader): flash, block=75, bs=1024, auto=1
17:21:52.841 (loader): gauge old value = 75
17:21:52.845 (loader): flash, block=76, bs=1024, auto=1
17:21:52.849 (loader): gauge old value = 76
17:21:52.852 (loader): flash, block=77, bs=1024, auto=1
17:21:52.856 (loader): gauge old value = 77
17:21:52.859 (loader): flash, block=78, bs=1024, auto=1
17:21:52.863 (loader): gauge old value = 78
17:21:52.867 (loader): flash, block=79, bs=1024, auto=1
17:21:52.872 (loader): gauge old value = 79
17:21:52.876 (loader): flash, block=80, bs=1024, auto=1
17:21:52.879 (loader): gauge old value = 80
17:21:52.883 (loader): flash, block=81, bs=1024, auto=1
17:21:52.888 (loader): gauge old value = 81
17:21:52.892 (loader): flash, block=82, bs=1024, auto=1
17:21:52.896 (loader): gauge old value = 82
17:21:52.900 (loader): flash, block=83, bs=1024, auto=1
17:21:52.904 (loader): gauge old value = 83
17:21:52.908 (loader): flash, block=84, bs=1024, auto=1
17:21:52.912 (loader): gauge old value = 84
17:21:52.916 (loader): flash, block=85, bs=1024, auto=1
17:21:52.919 (loader): gauge old value = 85
17:21:52.923 (loader): flash, block=86, bs=1024, auto=1
17:21:52.928 (loader): gauge old value = 86
17:21:52.933 (loader): remote cmd from 1620: "status"
17:21:52.937 (loader): flash, block=87, bs=1024, auto=1
17:21:52.938 (reboot 17): Status: 1, 1, 1, 5, 0, 1, C:\Users\kurte\AppData\Local\Temp\arduino_build_853169\, uncannyEyes.ino.hex
17:21:52.942 (loader): gauge old value = 87
17:21:52.946 (loader): flash, block=88, bs=1024, auto=1
17:21:52.950 (loader): gauge old value = 88
17:21:52.954 (loader): flash, block=89, bs=1024, auto=1
17:21:52.960 (loader): gauge old value = 89
17:21:52.964 (loader): flash, block=90, bs=1024, auto=1
17:21:52.968 (loader): gauge old value = 90
17:21:52.971 (loader): flash, block=91, bs=1024, auto=1
17:21:52.976 (loader): gauge old value = 91
17:21:52.980 (loader): flash, block=92, bs=1024, auto=1
17:21:52.984 (loader): gauge old value = 92
17:21:52.988 (loader): flash, block=93, bs=1024, auto=1
17:21:52.989 (reboot 17): status read, retry 3
17:21:52.989 (reboot 17): Success
17:21:52.989 (reboot 17): Disconnect
17:21:52.992 (loader): gauge old value = 93
17:21:52.996 (loader): flash, block=94, bs=1024, auto=1
17:21:53.000 (loader): gauge old value = 94
17:21:53.004 (loader): remote connection 1620 closed
17:21:53.028 (loader): remote connection 1640 closed
17:21:53.035 (loader): flash, block=95, bs=1024, auto=1
17:21:53.039 (loader): gauge old value = 95
17:21:53.043 (loader): flash, block=96, bs=1024, auto=1
17:21:53.047 (loader): gauge old value = 96
17:21:53.054 (loader): flash, block=97, bs=1024, auto=1
17:21:53.058 (loader): gauge old value = 97
17:21:53.062 (loader): flash, block=98, bs=1024, auto=1
17:21:53.066 (loader): gauge old value = 98
17:21:53.070 (loader): flash, block=99, bs=1024, auto=1
17:21:53.074 (loader): gauge old value = 99
17:21:53.079 (loader): flash, block=100, bs=1024, auto=1
17:21:53.084 (loader): gauge old value = 100
17:21:53.088 (loader): flash, block=101, bs=1024, auto=1
17:21:53.092 (loader): gauge old value = 101
17:21:53.096 (loader): flash, block=102, bs=1024, auto=1
17:21:53.100 (loader): gauge old value = 102
17:21:53.105 (loader): flash, block=103, bs=1024, auto=1
17:21:53.109 (loader): gauge old value = 103
17:21:53.113 (loader): flash, block=104, bs=1024, auto=1
17:21:53.117 (loader): gauge old value = 104
17:21:53.121 (loader): flash, block=105, bs=1024, auto=1
17:21:53.125 (loader): gauge old value = 105
17:21:53.128 (loader): flash, block=106, bs=1024, auto=1
17:21:53.132 (loader): gauge old value = 106
17:21:53.136 (loader): flash, block=107, bs=1024, auto=1
17:21:53.140 (loader): gauge old value = 107
17:21:53.144 (loader): flash, block=108, bs=1024, auto=1
17:21:53.150 (loader): gauge old value = 108
17:21:53.154 (loader): flash, block=109, bs=1024, auto=1
17:21:53.158 (loader): gauge old value = 109
17:21:53.159 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:21:53.160 (ports 5): nothing new, skipping HID & Ports enum
17:21:53.163 (loader): flash, block=110, bs=1024, auto=1
17:21:53.167 (loader): gauge old value = 110
17:21:53.170 (loader): flash, block=111, bs=1024, auto=1
17:21:53.174 (loader): gauge old value = 111
17:21:53.204 (loader): flash, block=112, bs=1024, auto=1
17:21:53.208 (loader): gauge old value = 112
17:21:53.210 (loader): flash, block=113, bs=1024, auto=1
17:21:53.214 (loader): gauge old value = 113
17:21:53.217 (loader): flash, block=114, bs=1024, auto=1
17:21:53.224 (loader): gauge old value = 114
17:21:53.227 (loader): flash, block=115, bs=1024, auto=1
17:21:53.233 (loader): gauge old value = 115
17:21:53.236 (loader): flash, block=116, bs=1024, auto=1
17:21:53.240 (loader): gauge old value = 116
17:21:53.243 (loader): flash, block=117, bs=1024, auto=1
17:21:53.247 (loader): gauge old value = 117
17:21:53.251 (loader): flash, block=118, bs=1024, auto=1
17:21:53.254 (loader): gauge old value = 118
17:21:53.258 (loader): flash, block=119, bs=1024, auto=1
17:21:53.261 (loader): gauge old value = 119
17:21:53.265 (loader): flash, block=120, bs=1024, auto=1
17:21:53.268 (loader): gauge old value = 120
17:21:53.271 (loader): flash, block=121, bs=1024, auto=1
17:21:53.274 (loader): gauge old value = 121
17:21:53.278 (loader): flash, block=122, bs=1024, auto=1
17:21:53.282 (loader): gauge old value = 122
17:21:53.286 (loader): flash, block=123, bs=1024, auto=1
17:21:53.290 (loader): gauge old value = 123
17:21:53.293 (loader): flash, block=124, bs=1024, auto=1
17:21:53.297 (loader): gauge old value = 124
17:21:53.301 (loader): flash, block=125, bs=1024, auto=1
17:21:53.305 (loader): gauge old value = 125
17:21:53.309 (loader): flash, block=126, bs=1024, auto=1
17:21:53.312 (loader): gauge old value = 126
17:21:53.315 (loader): flash, block=127, bs=1024, auto=1
17:21:53.319 (loader): gauge old value = 127
17:21:53.322 (loader): flash, block=128, bs=1024, auto=1
17:21:53.325 (loader): gauge old value = 128
17:21:53.329 (loader): flash, block=129, bs=1024, auto=1
17:21:53.333 (loader): gauge old value = 129
17:21:53.337 (loader): flash, block=130, bs=1024, auto=1
17:21:53.341 (loader): gauge old value = 130
17:21:53.345 (loader): flash, block=131, bs=1024, auto=1
17:21:53.350 (loader): gauge old value = 131
17:21:53.353 (loader): flash, block=132, bs=1024, auto=1
17:21:53.356 (loader): gauge old value = 132
17:21:53.360 (loader): flash, block=133, bs=1024, auto=1
17:21:53.364 (loader): gauge old value = 133
17:21:53.367 (loader): flash, block=134, bs=1024, auto=1
17:21:53.371 (loader): gauge old value = 134
17:21:53.374 (loader): flash, block=135, bs=1024, auto=1
17:21:53.377 (loader): gauge old value = 135
17:21:53.381 (loader): flash, block=136, bs=1024, auto=1
17:21:53.385 (loader): gauge old value = 136
17:21:53.389 (loader): flash, block=137, bs=1024, auto=1
17:21:53.393 (loader): gauge old value = 137
17:21:53.396 (loader): flash, block=138, bs=1024, auto=1
17:21:53.399 (loader): gauge old value = 138
17:21:53.403 (loader): flash, block=139, bs=1024, auto=1
17:21:53.406 (loader): gauge old value = 139
17:21:53.410 (loader): flash, block=140, bs=1024, auto=1
17:21:53.413 (loader): gauge old value = 140
17:21:53.417 (loader): flash, block=141, bs=1024, auto=1
17:21:53.421 (loader): gauge old value = 141
17:21:53.424 (loader): flash, block=142, bs=1024, auto=1
17:21:53.427 (loader): gauge old value = 142
17:21:53.430 (loader): flash, block=143, bs=1024, auto=1
17:21:53.434 (loader): gauge old value = 143
17:21:53.437 (loader): flash, block=144, bs=1024, auto=1
17:21:53.441 (loader): gauge old value = 144
17:21:53.444 (loader): flash, block=145, bs=1024, auto=1
17:21:53.449 (loader): gauge old value = 145
17:21:53.452 (loader): flash, block=146, bs=1024, auto=1
17:21:53.455 (loader): gauge old value = 146
17:21:53.458 (loader): flash, block=147, bs=1024, auto=1
17:21:53.462 (loader): gauge old value = 147
17:21:53.466 (loader): flash, block=148, bs=1024, auto=1
17:21:53.469 (loader): gauge old value = 148
17:21:53.473 (loader): flash, block=149, bs=1024, auto=1
17:21:53.476 (loader): gauge old value = 149
17:21:53.479 (loader): flash, block=150, bs=1024, auto=1
17:21:53.483 (loader): gauge old value = 150
17:21:53.486 (loader): flash, block=151, bs=1024, auto=1
17:21:53.489 (loader): gauge old value = 151
17:21:53.493 (loader): flash, block=152, bs=1024, auto=1
17:21:53.496 (loader): gauge old value = 152
17:21:53.499 (loader): flash, block=153, bs=1024, auto=1
17:21:53.503 (loader): gauge old value = 153
17:21:53.506 (loader): flash, block=154, bs=1024, auto=1
17:21:53.510 (loader): gauge old value = 154
17:21:53.513 (loader): flash, block=155, bs=1024, auto=1
17:21:53.517 (loader): gauge old value = 155
17:21:53.520 (loader): flash, block=156, bs=1024, auto=1
17:21:53.523 (loader): gauge old value = 156
17:21:53.526 (loader): flash, block=157, bs=1024, auto=1
17:21:53.529 (loader): gauge old value = 157
17:21:53.533 (loader): flash, block=158, bs=1024, auto=1
17:21:53.536 (loader): gauge old value = 158
17:21:53.539 (loader): flash, block=159, bs=1024, auto=1
17:21:53.542 (loader): gauge old value = 159
17:21:53.546 (loader): flash, block=160, bs=1024, auto=1
17:21:53.549 (loader): gauge old value = 160
17:21:53.552 (loader): flash, block=161, bs=1024, auto=1
17:21:53.556 (loader): gauge old value = 161
17:21:53.559 (loader): flash, block=162, bs=1024, auto=1
17:21:53.562 (loader): gauge old value = 162
17:21:53.566 (loader): flash, block=163, bs=1024, auto=1
17:21:53.569 (loader): gauge old value = 163
17:21:53.572 (loader): flash, block=164, bs=1024, auto=1
17:21:53.575 (loader): gauge old value = 164
17:21:53.579 (loader): flash, block=165, bs=1024, auto=1
17:21:53.582 (loader): gauge old value = 165
17:21:53.586 (loader): flash, block=166, bs=1024, auto=1
17:21:53.589 (loader): gauge old value = 166
17:21:53.593 (loader): flash, block=167, bs=1024, auto=1
17:21:53.597 (loader): gauge old value = 167
17:21:53.600 (loader): flash, block=168, bs=1024, auto=1
17:21:53.603 (loader): gauge old value = 168
17:21:53.607 (loader): flash, block=169, bs=1024, auto=1
17:21:53.610 (loader): gauge old value = 169
17:21:53.613 (loader): flash, block=170, bs=1024, auto=1
17:21:53.616 (loader): gauge old value = 170
17:21:53.620 (loader): flash, block=171, bs=1024, auto=1
17:21:53.623 (loader): gauge old value = 171
17:21:53.626 (loader): flash, block=172, bs=1024, auto=1
17:21:53.630 (loader): gauge old value = 172
17:21:53.633 (loader): flash, block=173, bs=1024, auto=1
17:21:53.636 (loader): gauge old value = 173
17:21:53.639 (loader): flash, block=174, bs=1024, auto=1
17:21:53.642 (loader): gauge old value = 174
17:21:53.646 (loader): flash, block=175, bs=1024, auto=1
17:21:53.649 (loader): gauge old value = 175
17:21:53.652 (loader): flash, block=176, bs=1024, auto=1
17:21:53.656 (loader): gauge old value = 176
17:21:53.659 (loader): flash, block=177, bs=1024, auto=1
17:21:53.663 (loader): gauge old value = 177
17:21:53.666 (loader): flash, block=178, bs=1024, auto=1
17:21:53.669 (loader): gauge old value = 178
17:21:53.673 (loader): flash, block=179, bs=1024, auto=1
17:21:53.676 (loader): gauge old value = 179
17:21:53.679 (loader): flash, block=180, bs=1024, auto=1
17:21:53.682 (loader): gauge old value = 180
17:21:53.686 (loader): flash, block=181, bs=1024, auto=1
17:21:53.689 (loader): gauge old value = 181
17:21:53.692 (loader): flash, block=182, bs=1024, auto=1
17:21:53.696 (loader): gauge old value = 182
17:21:53.699 (loader): flash, block=183, bs=1024, auto=1
17:21:53.703 (loader): gauge old value = 183
17:21:53.706 (loader): flash, block=184, bs=1024, auto=1
17:21:53.711 (loader): gauge old value = 184
17:21:53.714 (loader): flash, block=185, bs=1024, auto=1
17:21:53.717 (loader): gauge old value = 185
17:21:53.721 (loader): flash, block=186, bs=1024, auto=1
17:21:53.724 (loader): gauge old value = 186
17:21:53.727 (loader): flash, block=187, bs=1024, auto=1
17:21:53.731 (loader): gauge old value = 187
17:21:53.734 (loader): flash, block=188, bs=1024, auto=1
17:21:53.737 (loader): gauge old value = 188
17:21:53.740 (loader): flash, block=189, bs=1024, auto=1
17:21:53.744 (loader): gauge old value = 189
17:21:53.747 (loader): flash, block=190, bs=1024, auto=1
17:21:53.750 (loader): gauge old value = 190
17:21:53.754 (loader): flash, block=191, bs=1024, auto=1
17:21:53.758 (loader): gauge old value = 191
17:21:53.761 (loader): flash, block=192, bs=1024, auto=1
17:21:53.764 (loader): gauge old value = 192
17:21:53.773 (loader): sending reboot
17:21:53.778 (loader): begin wait_until_offline
17:21:53.783 (loader): offline, waited 0
17:21:53.785 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:21:53.786 (ports 5): remove: loc=usb:0/140000/0/7/2
17:21:53.786 (ports 5): usb_remove: usb:0/140000/0/7/2
17:21:53.786 (ports 5): nothing new, skipping HID & Ports enum
17:21:53.790 (loader): end operation, total time = 1.893 seconds
17:21:53.797 (loader): set background IMG_REBOOT_OK
17:21:53.807 (loader): redraw timer set, image 14 to show for 1200 ms
17:21:53.922 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:53.937 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:53.941 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:53.944 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:53.948 (loader): HID/win32: vid:046D pid:B01A ver:0003
17:21:53.952 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:53.956 (loader): HID/win32: vid:0A5C pid:8502 ver:0000
17:21:54.998 (loader): redraw, image 9
17:21:55.169 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:21:55.170 (ports 5): nothing new, skipping HID & Ports enum
17:21:55.473 (ports 5): purge, name=hid#vid_16c0&pid_0478 (Teensy 4-Beta2) Bootloader, loc=usb:0/140000/0/7/2, age=1.687 sec
17:22:15.918 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
17:22:15.919 (ports 5): nothing new, skipping HID & Ports enum
17:22:15.920 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
17:22:15.920 (ports 5): nothing new, skipping HID & Ports enum
17:22:16.447 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:22:16.448 (ports 5): nothing new, skipping HID & Ports enum
17:22:18.201 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
17:22:18.203 (ports 5): nothing new, skipping HID & Ports enum