Forum Rule: Always post complete source code & details to reproduce any issue!
Page 113 of 137 FirstFirst ... 13 63 103 111 112 113 114 115 123 ... LastLast
Results 2,801 to 2,825 of 3402

Thread: Teensy 4.0 First Beta Test

  1. #2801
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,604
    Msg #6 covers what I saw - adds at the end ...

    FWIW - the lps_test ran overnight - Serial send seems fast and clean to uninterrupted PC

    Was still running at ~210 lps since fresh restart - it is now in the ~170 range with firefox/sublime text open and active.

    These errors are all to be expected and recorded:
    Code:
    > _____MISSED lines____ #2 {cpl=34} count=100000001, lines/sec=214334
    #3 was dos box Buffer copy
    #4 not in new buffer - safe to assume it showed new digit : #4 {cpl=35} count=1000000001
    > _____MISSED lines____ #5 {cpl=36} count=1, lines/sec=205467 // count=10 in same buffer
    > _____MISSED lines____ #6 {cpl=28} count=101, lines/sec=205467
    > _____MISSED lines____ #7 {cpl=29} count=1001, lines/sec=205467
    > _____MISSED lines____ #8 {cpl=30} count=10001, lines/sec=205467
    > _____MISSED lines____ #9 {cpl=31} count=100001, lines/sec=205467
    > _____MISSED lines____ #10 {cpl=32} count=1000001, lines/sec=234264
    > _____MISSED lines____ #11 {cpl=33} count=10000001, lines/sec=216293
    > _____MISSED lines____ #12 {cpl=34} count=100000001, lines/sec=207797
    #13 not shown happened when I copied the dos box buffer
    9000 lines in dos box buffer when just copied
    Code:
    #33616971[4K] : __>> count=3864923157, lines/sec=197043 << >4> Good lines=____114
    #33617850[4K] : __>> count=3865023168, lines/sec=209016 << >4> Good lines=____114
    // ...
    #41328017[4K] : __>> count=463256201, lines/sec=217812 << >12> Good lines=117____
    #41328872[4K] : __>> count=463356261, lines/sec=217812 << >12> Good lines=117____
    #41329726[4K] : __>> count=463456203, lines/sec=218953 << >12> Good lines=117____
    <update> :
    >> multitasking OS seems to be more lossy than Teensy T4 at these rates - but that may just be because T4 is not supporting the 'availableForWrite()' to halt transmission when client gets busy:
    > opened EDGE browser and that caused data glitch again - I have 7 EDGE windows open with a combined 38 web pages in tabs
    > And opening each EDGE window to count the open tabs caused 3 data glitches with no apparent reason
    > came back and the lps_test.exe had exited with NO ERROR - not sure if I did that? - then just reran it and it picked up on a buffer boundary with no T4 restart and no reported data glitch on starting.
    Code:
    #50115385[4K] : __>> count=1478669116, lines/sec=195738 << >15> Good lines=____114
    #50116264[4K] : __>> count=1478769127, lines/sec=194467 << >15> Good lines=____114
    Got a BARRAGE of FAILS on PC in use … went from #15 errors to #96 where there was utter garbage in the buffer in two batches - then back to normal operation:
    #9062402[4K] : __>> count=2675641990, lines/sec=206023 << >6> Good lines=113____

    > _____MISSED lines____ #7 {cpl=305}
    XHdi%xZ lyRƻ╬O)ⁿ.╖εJ≡3╦tw▐7
    Last edited by defragster; 05-08-2019 at 09:25 PM.

  2. #2802
    Senior Member
    Join Date
    Jul 2014
    Posts
    2,204
    Quote Originally Posted by WMXZ View Post
    edit:
    @mjs513: run test on T3.6 with build-in SDHC (TEST_DRV = 1) got the same rc=1 error
    OK will investigate
    cmd13 did not work properly (too many checks!)
    modified code update GitHub
    and SDHC is now working for both T3.6 and T4b2

    re USBHost on T4: I know that USB-T4 is only working for USB_Serial. we may have to wait for Paul to implement USB_DISABLED, or do I miss something ?

  3. #2803
    Senior Member+
    Join Date
    Jul 2014
    Location
    New York
    Posts
    3,346
    Quote Originally Posted by WMXZ View Post
    cmd13 did not work properly (too many checks!)
    modified code update GitHub
    and SDHC is now working for both T3.6 and T4b2

    re USBHost on T4: I know that USB-T4 is only working for USB_Serial. we may have to wait for Paul to implement USB_DISABLED, or do I miss something ?
    Just did a grepwin of both T3 and T4 cores the only delta's I see is that its not defined in usb_dev.h which may or my not be an issue. But seems to be in the other files (at least its there). Someone may need to confirm my observations. This was really quick and dirty.

  4. #2804
    Senior Member+ Frank B's Avatar
    Join Date
    Apr 2014
    Location
    Germany NRW
    Posts
    5,605
    Not sure if it is an issue, but every time after installing a new Teensyduino version, it switches to Teensy 3.6 as default, which is a bit confusing

    The USB updates work quite well.
    Last edited by Frank B; 05-08-2019 at 07:50 PM.

  5. #2805
    Senior Member+ Frank B's Avatar
    Join Date
    Apr 2014
    Location
    Germany NRW
    Posts
    5,605
    Java exceptions:
    I got these often in the last days - with a program that does only (USB-)print a few lines at startup, and after that, nothing. The execptions occured when compling the new program. It has > 12K lines in a single *.ino and large libraries like audio, MP3 and AAC (and it had really a LOT of warnings :-( - the builder prints to stdout/stderr which then gets redicrected to arduino?)
    After that, only a restart of arduino helped. May be, the root-cause of these exceptions has nothing to do with the monitor or serial...

  6. #2806
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,604
    Quote Originally Posted by Frank B View Post
    Not sure if it is an issue, but every time after installing a new Teensyduino version, it switches to teensy 3.6 as default, which is be a bit confusing

    The USB updates work quite well.
    Indeed FrankB - It does switch away from BETA T4 on each install - catches me each time with a 'bad hex' lecture from TeensyLoader. I assume this is worthy of the msg #6 list - probably just that it really isn't a 'shipping product' yet.

    Indeed USB seems stable and fast - thinking of putting my lps_test.exe on a second unused computer to run with T4B1 board. - then update that with USB changes as offered maybe integrate similar receive testing in same sketch/exe combo.

    About to add update notes to #2801 above - multitasking OS seems to be more lossy than Teensy T4 at these rates - but that may just be because T4 is not supporting the 'availableForWrite()' to halt transmission when client gets busy:
    > opened EDGE browser and that caused data glitch again - I have 7 EDGE windows open with a combined 38 web pages in tabs
    > And opening each EDGE window to count the open tabs caused 3 data glitches with no apparent reason
    > came back and the lps_test.exe had exited with NO ERROR - not sure if I did that? - then just reran it and it picked up on a buffer boundary with no T4 restart and no reported data glitch on starting.
    Code:
    #50115385[4K] : __>> count=1478669116, lines/sec=195738 << >15> Good lines=____114
    #50116264[4K] : __>> count=1478769127, lines/sec=194467 << >15> Good lines=____114
    Going to add 2801 : availableForWrite needed and 2804 : Teensy T4 not default Board after install.

  7. #2807
    Senior Member+ KurtE's Avatar
    Join Date
    Jan 2014
    Posts
    4,714
    Quote Originally Posted by WMXZ View Post
    re USBHost on T4: I know that USB-T4 is only working for USB_Serial. we may have to wait for Paul to implement USB_DISABLED, or do I miss something ?
    Sorry, maybe I am missing something. Which USB port are we talking about?

    That is I believe there are two USB ports.

    a) The one that you use to talk to the Host computer... The one which configuring the Teensy for USB_Serial, or Keyboard....

    b) The second USB port which we are configuring as a Host, currently in USBHost_t36 library, which we also have working on the host support code for (Keyboards, Mice, joysticks, some bluetooth, Midi, Serial).

    I believe we are talking about the b) part? I know that some of the underlying stuff on the T4 is different than the T3.6, but @Paul put in some translations and the like in the usbhost_t36\utility\imxrt_usbhs.h file which I believe translates the T3.6 USB Host definitions into the T4 versions.

  8. #2808
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,604
    Quote Originally Posted by KurtE View Post
    Sorry, maybe I am missing something. Which USB port are we talking about?
    ...
    a) The one that you use to talk to the Host computer... The one which configuring the Teensy for USB_Serial, or Keyboard....
    ...

    If this USB port - Paul noted my find in post #6 issues: USB_DISABLED doesn't build.

  9. #2809
    Senior Member
    Join Date
    Jul 2014
    Posts
    2,204
    Quote Originally Posted by KurtE View Post
    Sorry, maybe I am missing something. Which USB port are we talking about?
    Confusion is on my side.
    I was talking about USBHost port on T4b2, where I can plug-in an USB stick.

    As is, I cannot get it working.
    Code does not pass mscInit(); or better while(!msDrive1.available());

    Seems that my setup (HW or SW) is missing something.
    @mjs513: on which system did you get uSDFS (TEST_DRV = 2) working?

  10. #2810
    Senior Member+ KurtE's Avatar
    Join Date
    Jan 2014
    Posts
    4,714
    @WMXZ and @mjs513 -

    Are you just using your stuff or do you still need the MSC stuff changed from the zip file?

    Will try to take a look.

  11. #2811
    Senior Member
    Join Date
    Jul 2014
    Posts
    2,204
    Quote Originally Posted by KurtE View Post
    @WMXZ and @mjs513 -

    Are you just using your stuff or do you still need the MSC stuff changed from the zip file?

    Will try to take a look.
    OK,
    I got it working, some sort of.
    Updated GitHub now (Had to add some statements into my msc interface)

    @KurtE
    You still need msc library (from zip file) installed into your Arduino library folder

    I said: got it working some sort of, because the uSDFS_test program only runs when USBHOST_PRINT_DEBUG is enabled in USBHost_t36.h
    without that program crashes at different places. Seems to be a timing issue
    ( I use A_1.8.8 with TD_1.47beta1) so it may not be (for sure is not) latest Version.

  12. #2812
    Senior Member+ KurtE's Avatar
    Join Date
    Jan 2014
    Posts
    4,714
    Quote Originally Posted by WMXZ View Post
    @KurtE
    You still need msc library (from zip file) installed into your Arduino library folder

    I said: got it working some sort of, because the uSDFS_test program only runs when USBHOST_PRINT_DEBUG is enabled in USBHost_t36.h
    without that program crashes at different places. Seems to be a timing issue
    ( I use A_1.8.8 with TD_1.47beta1) so it may not be (for sure is not) latest Version.
    Do I still need to copy his version of files into your library (ones like diskio.c?)

    WinMerge does show they are not the same...


    So far I have not tried to copy in these files... Did try running with a couple of different thumb drives and I just see:
    Code:
    Test uSDFS
    2:/
    
    Change drive
    
    Create a new subdirectories.
    mkDir Ascii: Failed with rc=12.

  13. #2813
    Senior Member+
    Join Date
    Jul 2014
    Location
    New York
    Posts
    3,346
    Quote Originally Posted by WMXZ View Post
    Confusion is on my side.
    I was talking about USBHost port on T4b2, where I can plug-in an USB stick.

    As is, I cannot get it working.
    Code does not pass mscInit(); or better while(!msDrive1.available());

    Seems that my setup (HW or SW) is missing something.
    @mjs513: on which system did you get uSDFS (TEST_DRV = 2) working?
    Did I type something wrong, Test_Drv = 0 or 1 works, 2 does not.....sorry for the confusion

  14. #2814
    Senior Member+
    Join Date
    Jul 2014
    Location
    New York
    Posts
    3,346
    Quote Originally Posted by KurtE View Post
    Do I still need to copy his version of files into your library (ones like diskio.c?)

    WinMerge does show they are not the same...


    So far I have not tried to copy in these files... Did try running with a couple of different thumb drives and I just see:
    Code:
    Test uSDFS
    2:/
    
    Change drive
    
    Create a new subdirectories.
    mkDir Ascii: Failed with rc=12.
    @KurtE and @WMXZ

    Just retested with test_drv=0 and SD Card reader in the USBhost port and it identified it no problem and the data was correct. This was the same reader that didn't work in previous testing.

    Doesn't read USB sticks that I have but they are kind of old ones - Sony Cruz 4gb and a Microcenter 2gb one. Not sure the format on them - they should be FAT32's.

    Still now sure what do with wwatson's library - do I copy those files over to the your library that it tells me to replace or is all I need is the massstorage.h file?

  15. #2815
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,604
    I scanned the WMXZ github readme - it said 'MSC lib was required - but copy of files not needed'

    or to quote: "needs MSC library (https://forum.pjrc.com/threads/55821...er-Experiments) (no need to copy files over from MSC library to uSDFS library)"

  16. #2816
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    20,088
    Quote Originally Posted by defragster View Post
    USB_DISABLED doesn't build.
    Yup. For now, USB Serial is the only one that works. I'm intentionally keeping the USB code simpler by not supporting any others, even just completely disabling the USB port. Will do MIDI, Audio, and all the others later, after the remaining stuff on USB serial gets done...

    Receiving data isn't optimized yet. Support for serialEvent is also missing. I want to do those before expanding the USB code.

    I'm also planning another round of substantial optimizations on transmitting. The timeout for concluding the PC isn't listening might need to increase, since we're also to overwhelm most Windows software.

    Still thinking about how I want to do availableForWrite(). There's a long-standing and very subtle bug on Teensy3's availableForWrite(), where an auto flush occurs between the time availableForWrite() promises a certain amount of space and the user later writes, expecting it to be non-blocking. I want to come up with a better strategy on T4 to completely avoid that rare but very difficult case. That's why availableForWrite() remains undone.

    But if the timeout code is being triggered because we're too fast for PC-side software, we really need a longer timeout rather than requiring use of availableForWrite() for non real-time applications.


    However, at this moment my top priorities are looking into the CP2104 phantom power startup problem (just dug out my Adafruit CP2104 board this morning) and a bootloader update to fix the bugs with the 15 second restore process. There may also be another minor bootloader bug affecting USB descriptors. All 3 operating systems seem to ignore it (as far as I can tell), but still ought to get fixed.

  17. #2817
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,604
    Paul - startup halting isn't hard - doesn't take anything but 3v3 on a pin (with enough current). Teensy or CP2104 - only difference is drive strength - and if the UART sense inactivity and drops current drive. It may be that I even had a 3.3V wire that did it - though of course if I did that it should have had a resistor inline to limit current.

    As noted I was seeing just over 20 mA from T_3.1 - my olde PL2303 only seemed to have a max drive of 9mA - and it seemed would sense no activity and drop the current - the Teensy doesn't do this as the meter held steady and the T_3.6 was at 19 mA where my cheap meter would peak and drop off as it eventually got around to reading and updating the display for the CP2104. Either of those T_3.x pins was enough perhaps with Rx or Tx connected because both seemed to be held at 3v3 - though the Rx line was more like 3.19 volts than 3.3 where Tx Stop is held.

  18. #2818
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,604
    I hooked up the T4B1 board to my i7 SurfaceBook and it is running 'similarly' - was connected direct to USB3 port and chattered not once but often 2-3 times on startup with missed data \n alignment. But an unpowered USB2 hub inline and that didn't change it - so the OS/Hardware timing to the port must affect it - it does run lps-test.exe okay for long stretches at similar speed 160-170K l/sec and sometime like i7 desktop even 200 to 220K for periods. Some oddities with the exe reading/buffering - it does just quit without posting an error like I have seen on my desktop at times - but restarting EXE and not the T4 picks up … Test could use some refinement as the USB stack gets improved but am not able to 'see' any pattern or trouble.

  19. #2819
    Senior Member+ manitou's Avatar
    Join Date
    Jan 2013
    Posts
    1,976
    Re: FastLED

    updated FastLED testing post, adding pin defs for T4B2 with fast GPIO.

  20. #2820
    Senior Member
    Join Date
    Jul 2014
    Posts
    2,204
    Quote Originally Posted by KurtE View Post
    Do I still need to copy his version of files into your library (ones like diskio.c?)

    WinMerge does show they are not the same...


    So far I have not tried to copy in these files... Did try running with a couple of different thumb drives and I just see:
    Code:
    Test uSDFS
    2:/
    
    Change drive
    
    Create a new subdirectories.
    mkDir Ascii: Failed with rc=12.
    NO you dont't copy the diskio et al. files over from MSC library to uSDFS.
    the uSDFS diskio.c is already prepared for MSC. copying could impact spi and usdhc functionality

    concerning your TEST_DRV=2 run, could you please activate the USBHost debugging print uncommenting #define USBHOST_PRINT_DEBUG in USBHost_t36.h
    In may case, this made the access to USBdisk without errors (in my case I used a HTrust uSD adapter)

    my hunch is that the USBHost or better the USB MassStorageDriver in MSC needs to be slowed down, or have better wait for reply/ready functions.

  21. #2821
    Senior Member+ KurtE's Avatar
    Join Date
    Jan 2014
    Posts
    4,714
    Thanks @WMXZ,

    I sort of figured that I did not need to copy those files, as I saw that you had made several changes to them.

    As per your previous post, I had turned on the debug printing code in USBHost_t36 but did not see any output from the debug messages of it... them, on either the T4B2 nor T3.6.
    I have tried using a couple of different thumb drives. One is an old Cruzer 1GB which I had Windows reformat yesterday, and the other was a new 8GB enfain, which had never been used before.

    Now that I am thinking about it, I used your version of the test app, not the one from the MSC library. Probably need the MSC library as it defines some objects from the USBHost library...

    Will try again.

    EDIT: This time things are being output, so making progress.
    On T4B2
    Code:
    Test uSDFS
    2:/
    USB2 PLL running
     reset waited 6
    USBHS_ASYNCLISTADDR = 0
    USBHS_PERIODICLISTBASE = 20005000
    periodictable = 20005000
    port change: 10001803
        connect
      begin reset
    port change: 18001205
      port enabled
      end recovery
    new_Device: 480 Mbit/sec
    new_Pipe
    enumeration:
    enumeration:
    enumeration:
    Device Descriptor:
      12 01 00 02 00 00 00 40 0C 09 00 10 00 11 01 02 00 01 
        VendorID = 090C, ProductID = 1000, Version = 1100
        Class/Subclass/Protocol = 0 / 0 / 0
        Number of Configurations = 1
    enumeration:
    enumeration:
    Manufacturer: SMI Corporation
    enumeration:
    Product: USB DISK
    enumeration:
    Config data length = 32
    enumeration:
    Configuration Descriptor:
      09 02 20 00 01 01 00 80 FA 
        NumInterfaces = 1
        ConfigurationValue = 1
      09 04 00 00 02 08 06 50 00 
        Interface = 0
        Number of endpoints = 2
        Class/Subclass/Protocol = 8(Mass Storage) / 6(SCSI) / 80(Bulk Only)
      07 05 81 02 00 02 FF 
        Endpoint = 1 IN
        Type = Bulk
        Max Size = 512
        Polling Interval = 255
      07 05 02 02 00 02 FF 
        Endpoint = 2 OUT
        Type = Bulk
        Max Size = 512
        Polling Interval = 255
    enumeration:
    msController claim this=200055A0
    Descriptor 4 = INTERFACE
    msController claim this=200055A0
    09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF 
    endpointType = 2
    numendpoint=2
    endpointIn=81
    endpointOut=2
    packet size in (msController) = 512
    packet size out (msController) = 512
    polling intervalIn = 255
    polling intervalOut = 255
    new_Pipe
    new_Pipe
    Descriptor 5 = ENDPOINT
    Descriptor 5 = ENDPOINT
    control CallbackIn (msController)
    00 00 00 00 00 00 00 00 
    control CallbackIn (msController)
    00 00 00 00 00 00 00 00 
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 80
    ERROR Followup
        remain on followup list
        remain on followup list
    Mount: Failed with rc=1.
    Goes better on T3.6...
    Code:
    Test uSDFS
    2:/
    sizeof Device = 36
    sizeof Pipe = 96
    sizeof Transfer = 64
    power up USBHS PHY
     reset waited 4
    USBHS_ASYNCLISTADDR = 0
    USBHS_PERIODICLISTBASE = 1FFF4000
    periodictable = 1FFF4000
    port change: 10001803
        connect
      begin reset
    port change: 18001205
      port enabled
      end recovery
    new_Device: 480 Mbit/sec
    new_Pipe
    enumeration:
    enumeration:
    enumeration:
    Device Descriptor:
      12 01 00 02 00 00 00 40 81 07 06 54 00 02 01 02 03 01 
        VendorID = 0781, ProductID = 5406, Version = 0200
        Class/Subclass/Protocol = 0 / 0 / 0
        Number of Configurations = 1
    enumeration:
    enumeration:
    Manufacturer: SanDisk
    enumeration:
    Product: U3 Cruzer Micro
    enumeration:
    Serial Number: 00007080C0732B8C
    enumeration:
    Config data length = 32
    enumeration:
    Configuration Descriptor:
      09 02 20 00 01 01 00 80 2F 
        NumInterfaces = 1
        ConfigurationValue = 1
      09 04 00 00 02 08 06 50 00 
        Interface = 0
        Number of endpoints = 2
        Class/Subclass/Protocol = 8(Mass Storage) / 6(SCSI) / 80(Bulk Only)
      07 05 81 02 00 02 00 
        Endpoint = 1 IN
        Type = Bulk
        Max Size = 512
        Polling Interval = 0
      07 05 02 02 00 02 00 
        Endpoint = 2 OUT
        Type = Bulk
        Max Size = 512
        Polling Interval = 0
    enumeration:
    msController claim this=1FFF45A0
    Descriptor 4 = INTERFACE
    msController claim this=1FFF45A0
    09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 00 07 05 02 02 00 02 00 
    endpointType = 2
    numendpoint=2
    endpointIn=81
    endpointOut=2
    packet size in (msController) = 512
    packet size out (msController) = 512
    polling intervalIn = 0
    polling intervalOut = 0
    new_Pipe
    new_Pipe
    Descriptor 5 = ENDPOINT
    Descriptor 5 = ENDPOINT
    control CallbackIn (msController)
    00 00 00 00 00 00 00 00 
    control CallbackIn (msController)
    01 00 00 00 00 00 00 00 
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    
    Change drive
    
    Create a new subdirectories.
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    
    Create a new file /Ascii/HELLO12.TXT.
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    Write some text lines. (Hello world!)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    Close the file.
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    
    Open same file /Ascii/HELLO12.TXT.
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    Get the file content.
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    Hello world!
    Second Line
    Third Line
    Fourth Line
    Habe keine Phantasie
    Close the file.
    
    open binary file
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    write file
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    close file
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    Binary test done
    
    Open root directory.
    Directory listing...
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackIn (static)
    transfer->qtd.token = 0
    msController CallbackOut (static)
    msController CallbackIn (static)
    transfer->qtd.token = 0
       <dir>  System Volume Information
       <dir>  Ascii
       <dir>  Binary
    
    Test completed.
    sizeof Device = 36
    sizeof Pipe = 96
    sizeof Transfer = 64
    power up USBHS PHY
     reset waited 4
    USBHS_ASYNCLISTADDR = 0
    USBHS_PERIODICLISTBASE = 1FFF4000
    periodictable = 1FFF4000
    Will try to debug some now...

    EDIT 3 - Looks like WWatson uploaded a new zip file for MSC with fixes in it... Need to figure out what parts need to go where...

    Kurt
    Last edited by KurtE; 05-09-2019 at 01:34 PM. Reason: new MSC zip file

  22. #2822
    Senior Member+
    Join Date
    Jul 2014
    Location
    New York
    Posts
    3,346
    @KurtE and @WMXZ

    Sorry not going to be of much help today. Got the 1060evk board yesterday afternoon and been trying to debug CANFD. Seems like I can get it to work on the SDK finally and got the register mapping. Redid the T4 sdk lib so now have the same register mappings on the T4 as on the SDK but the T4 is being stubborn - nothing coming in to the T4 or being transmitted. Will get there

    Good luck.

  23. #2823
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    20,088
    Quote Originally Posted by defragster View Post
    startup halting isn't hard - doesn't take anything but 3v3 on a pin (with enough current). Teensy or CP2104 - only difference is drive strength
    Yup, I've got it happening here.

    Investigating now. It's starting to look like I'm going to need to make another board rev to fix this.

  24. #2824
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,604
    Quote Originally Posted by PaulStoffregen View Post
    Yup, I've got it happening here.

    Investigating now. It's starting to look like I'm going to need to make another board rev to fix this.
    indeed. Though given the nature of it … glad it is fixable.

  25. #2825
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,604
    Quote Originally Posted by KurtE View Post
    ...

    EDIT 3 - Looks like WWatson uploaded a new zip file for MSC with fixes in it... Need to figure out what parts need to go where...

    Kurt
    That is posted here : USB-Mass-Storage-Driver-Experiments

    Updated OP on that thread to add pointer as well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •