WillMattWood
Member
Hello, first time Arduino/Teensy programmer.
Using a Teensy 3.2 and macOS 10.12
I am trying to walk through the steps on this page here: https://www.pjrc.com/teensy/td_usage.html
I have run the Teensyduino Installer (directing the Installer to the Arduino.app File in my Applications Folder as a destination.). So I assume that all of the Teensy specific dependencies have been installed correctly. I then open the TeensyLoader, ensure the Teensy is in programming mode, and then open the Arduino IDE.
However when I open the 1.8.8 Arduino IDE software, and navigate to File->Sketchbook->Digital->Blink in the the Arduino Menu Bar, (as instructed on the page linked above) this submenu is blank. Do I need to manually install sketches somewhere for there to be something listed here?
Using a Teensy 3.2 and macOS 10.12
I am trying to walk through the steps on this page here: https://www.pjrc.com/teensy/td_usage.html
I have run the Teensyduino Installer (directing the Installer to the Arduino.app File in my Applications Folder as a destination.). So I assume that all of the Teensy specific dependencies have been installed correctly. I then open the TeensyLoader, ensure the Teensy is in programming mode, and then open the Arduino IDE.
However when I open the 1.8.8 Arduino IDE software, and navigate to File->Sketchbook->Digital->Blink in the the Arduino Menu Bar, (as instructed on the page linked above) this submenu is blank. Do I need to manually install sketches somewhere for there to be something listed here?