Successfully created a jumbotron running glediator with ws2812b RGB strips, question
- Thread starter Thaitech
- Start date
- Status
So how would I add one into my setup? Do I need special pins or adapter PCB? And do I solder directly to the teensy/octo?
crees
Well-known member
you can also use this board. I only have a couple left. http://megapixel.lighting
Yes Please
Hey! So, I'm knee deep in my upgrade and glad I decided to go this route for now, as it will make my existing display look much better, especially once I add in the wiz**io adapter.. I was just about to order all the necessary parts and I decided to check this thread first (thankfully), and would love to order your board. My main question is whether yours includes everything necessary to "plug and play" with my teensy 3.2/OCTO? Also, how much is it, and how to I buy one? My cell is 575-574-2224, email: makelovetomusic@gmail.com. Thanks again!
Looking forward to posting my results
Hey! So, I'm knee deep in my upgrade and glad I decided to go this route for now, as it will make my existing display look much better, especially once I add in the wiz**io adapter.. I was just about to order all the necessary parts and I decided to check this thread first (thankfully), and would love to order your board. My main question is whether yours includes everything necessary to "plug and play" with my teensy 3.2/OCTO? Also, how much is it, and how to I buy one? My cell is 575-574-2224, email: makelovetomusic@gmail.com. Thanks again!
Looking forward to posting my results
https://www.youtube.com/watch?v=kvuTqsUCZJc
Here is a video of doubled resolution, now waiting for wiz850io and adapter to increase frame rate. Special thanks to Crees for the advice and also the updated code. Saved me a ton of time and trial and error
Here is a video of doubled resolution, now waiting for wiz850io and adapter to increase frame rate. Special thanks to Crees for the advice and also the updated code. Saved me a ton of time and trial and error
https://youtu.be/cH67ODKDrY0
^^ The latest programming of my display using Glediator. I’m currently waiting to receive a wiz850io and the adapter board for teensy so I can hopefully improve the frame rate.
Another question I have is if I were to create clones of this display using the same type and number of leds, would I be able to run all examples off the same Glediator software using a multi-tt usb hub and or the sync cable?
^^ The latest programming of my display using Glediator. I’m currently waiting to receive a wiz850io and the adapter board for teensy so I can hopefully improve the frame rate.
Another question I have is if I were to create clones of this display using the same type and number of leds, would I be able to run all examples off the same Glediator software using a multi-tt usb hub and or the sync cable?
https://youtu.be/FU3JJaDszbM
Latest programming and after I added a white scrim to diffuse the light
Latest programming and after I added a white scrim to diffuse the light
- Status