Forum Rule: Always post complete source code & details to reproduce any issue!
Page 2 of 2 FirstFirst 1 2
Results 26 to 30 of 30

Thread: Successfully created a jumbotron running glediator with ws2812b RGB strips, question

  1. #26
    Senior Member crees's Avatar
    Join Date
    Dec 2016
    Location
    Utah
    Posts
    119
    Yes I believe you will see an improvement with a wiz module.

  2. #27
    Junior Member
    Join Date
    Jun 2018
    Posts
    17
    Quote Originally Posted by crees View Post
    Yes I believe you will see an improvement with a wiz module.
    So how would I add one into my setup? Do I need special pins or adapter PCB? And do I solder directly to the teensy/octo?

  3. #28
    Junior Member
    Join Date
    Jun 2018
    Posts
    17
    NVM I found the info on pjrc.com, thank you though

  4. #29
    Senior Member crees's Avatar
    Join Date
    Dec 2016
    Location
    Utah
    Posts
    119
    you can also use this board. I only have a couple left. http://megapixel.lighting

  5. #30
    Junior Member
    Join Date
    Jun 2018
    Posts
    17

    Yes Please

    Quote Originally Posted by crees View Post
    you can also use this board. I only have a couple left. http://megapixel.lighting
    Hey! So, I'm knee deep in my upgrade and glad I decided to go this route for now, as it will make my existing display look much better, especially once I add in the wiz**io adapter.. I was just about to order all the necessary parts and I decided to check this thread first (thankfully), and would love to order your board. My main question is whether yours includes everything necessary to "plug and play" with my teensy 3.2/OCTO? Also, how much is it, and how to I buy one? My cell is 575-574-2224, email: makelovetomusic@gmail.com. Thanks again!

    Looking forward to posting my results

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •