Hi there,
I recently purchased a Teensy 3.5 because I had run out of i/o pins on Arduino, Pro trinket etc.
The teensy 3.5 is working fine, with the exception of the real time clock. I have used all the examples, changed the libraries, double checked everything and I cannot either set or display the time using the examples provided.
The serial window just reports the following or the error message contained within the sketch used.
DS1307 Communication Error :-{
Please check your circuitry
Obviously because the rtc is contained within the Teensy 3.5 board it is not possible to check the circuitry. I have not connected the rtc battery to the rtc.
thanks in advance
I recently purchased a Teensy 3.5 because I had run out of i/o pins on Arduino, Pro trinket etc.
The teensy 3.5 is working fine, with the exception of the real time clock. I have used all the examples, changed the libraries, double checked everything and I cannot either set or display the time using the examples provided.
The serial window just reports the following or the error message contained within the sketch used.
DS1307 Communication Error :-{
Please check your circuitry
Obviously because the rtc is contained within the Teensy 3.5 board it is not possible to check the circuitry. I have not connected the rtc battery to the rtc.
thanks in advance