Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Teensynth

  1. #1
    Junior Member
    Join Date
    Mar 2019
    Posts
    17

    Teensynth

    Hi,

    New to the forum and new to Teensy boards, a pleasure...

    I'm looking to make a rather simplistic synth (1-2 osc, arpeggiator, amp-envelope, filters, and a few effects).
    Looking for a nice "How-to"/tutorial to at least figure out the hardware components and the first steps.

    Q's I have so far:
    1. Must I use the Audio adaptor in order to do any work with audio (synth, sample sequencer, etc).
    2. what board should I use (3.2, 3.6)? It's a rather simple synth. if 3.6 - how do I know how to put on the audio adaptor?
    3. would teensy's audio library allow me to play polyphonic notes and play 2 osc's simultaneously?


    Sorry for the low-res question.

    Any help/reference would be great.

  2. #2
    Senior Member+ Theremingenieur's Avatar
    Join Date
    Feb 2014
    Location
    Colmar, France
    Posts
    2,386
    The audio library can do everything you need. It can also work with the audio adapter shield, but it's not mandatory. If 12bit resolution @44.1kS/s is enough for you, you might go away with the internal ADCs and DAC(s) of the Teensy 3.x.

    The Teensy 3.2 has only one DAC, giving you one single line output (onto which the audio lib might send multiple signals through a virtual mixer, though), the Teensy 3.5 and 3.6 have 2 DACs giving you 2 independent line outputs, if needed.

    I'd start the project with a Teensy 3.2 which should be able to handle your needs. If you run into issues afterwards, ordering a Teensy 3.6 and migrate your code is a task of 5 minutes.

  3. #3
    Junior Member
    Join Date
    Aug 2015
    Posts
    5
    in terms of a nice easy to follow tutorial, this guy did a nice video series that helped me a lot when I first got started with the audio library:
    http://www.notesandvolts.com/2018/05...th-part-1.html

    Quote Originally Posted by Ayal View Post
    Hi,

    New to the forum and new to Teensy boards, a pleasure...

    I'm looking to make a rather simplistic synth (1-2 osc, arpeggiator, amp-envelope, filters, and a few effects).
    Looking for a nice "How-to"/tutorial to at least figure out the hardware components and the first steps.

    Q's I have so far:
    1. Must I use the Audio adaptor in order to do any work with audio (synth, sample sequencer, etc).
    2. what board should I use (3.2, 3.6)? It's a rather simple synth. if 3.6 - how do I know how to put on the audio adaptor?
    3. would teensy's audio library allow me to play polyphonic notes and play 2 osc's simultaneously?


    Sorry for the low-res question.

    Any help/reference would be great.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •