Kinetis KE1xF

Status
Not open for further replies.
Blake.Volpex

Blake.Volpex

New member
I'm looking to port an Arduino project to an arm chip.
It has bean successfully run on the Teensy 3.5 but 3.3v is not ideal (all the sensors are 5v, so analog read accuracy suffers).
There are ways around that (5v ADC likely being the best), but there are 5v arm chips avalible.

Would it be possible to get Bootloader Chips that are compatible with the MKE16F256VLH16 ?

I can make the Teensy 3.5/3.6 work but as I was planning to make my own custom boards and buy bootlouder chips anyway I figured it was worth asking.

Thanks.
 
I figured it wasn't supported, I was more looking to see what it would take to add support.
As I don't know how much work it would take, and how much you'd charge for your time.
 
Even if it were possible, PJRC would not do this, because we're working on Teensy 4 beta right now!

But since this chip lacks USB, it's just not possible.
 
Status
Not open for further replies.
Back
Top