Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 10 of 10

Thread: T-LC Hardwear DAC and LED

Threaded View

  1. #1
    Junior Member
    Join Date
    Apr 2017
    Location
    at home
    Posts
    11

    T-LC Hardwear DAC and LED

    At the movement I'm not interested in Forth coded Automatic Video Cuckoo Clock, I would just like to use the in board LED on "PIN 13" AND the hardware DAC at the same time - BUT they SEEM to use the same pin ? HUH? I'm confused - If they do 'share' the Pin, then how do I disconnect the LED from the PIN so I can use the analog output AND how do I then flash the led. I have looked all over and there is a lot of esoterica but little simple stuff. (started out with 6800 @ 1 Mhz with 16 bytes of ram and 512 bytes of EPROM.).
    Last edited by emmbeabee; 04-01-2019 at 07:14 PM. Reason: 2--3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •