Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Teensy 3.2 Analog / Digital Pins with Encoder

  1. #1

    Teensy 3.2 Analog / Digital Pins with Encoder


    So I'm using an encoder on my Teensy 3.2. Had it wired up on pin 6, and pin 7, working perfectly. I'm aware that the Teensy 3.2 has digital pins where the analog pins are as well, so I moved the wires and GND over to pins 14, 15, and changed my pin declaration inside the code and it doesn't work. Tried other pins on the analog side, nothing works. Moved the pins back to 6 and 7, it works, just doesn't seem to work on the analog side of the board.

    Anyone come across this?


  2. #2
    are you using hold up resistors on the encoder lines?
    Not sure if it's THE fix, but just curious.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts