Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Audio board Rev D for teensy 3.6

  1. #1
    Junior Member
    Join Date
    Feb 2020
    Posts
    3

    Audio board Rev D for teensy 3.6

    Hi Iím new to programming I have teensy 3.6 with audio board marked Rev D for 3.6 must I rewire audio for 3.6 ? Or just solder header pins ? Any help thank you

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    10,625
    The Rev D board is wired for direct connect to a Teensy 4.0 with pins moved as needed from the T_3.x locations.

    For direct solder a Rev C Audio board works on the Teensy 3.2/3.5/3.6.

    To use the Rev D board on a T_3.6 would require manually connecting those changed pins to the proper locations.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •