Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Run teensy3.2 with labview using command line.

  1. #1
    Junior Member
    Join Date
    Feb 2019
    Posts
    17

    Run teensy3.2 with labview using command line.

    hello everyone,
    I want to run teensy3.2 through labview
    Lets say,
    I have a code of led blink saved in computer drive.
    In LabVIEW, I want to make a button, means when I press it the save code from the directory
    automatically burn in my teensy3.2
    any kind of help will be appriciated, thanks.

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    8,549
    I closed prior thread this duplicates.

    Not seen how LabView is used here and how it could be expected to program a Teensy using the USB port protocol required.

    There are command line ways of calling tools to program the Teensy - but doing it within some other program? Perhaps it has features needed to call out and do this - more info would be needed in any case

  3. #3
    Junior Member
    Join Date
    Feb 2019
    Posts
    17
    Thanks for your reply actually in lab view there is one System exec VI,
    If I have these two command lines,
    1-for the opening program from a specific location of PC
    2-upload program to teensy

    how can we get these two command lines.

    so we can use this VI(System VI)

    Click image for larger version. 

Name:	VI.PNG 
Views:	3 
Size:	3.8 KB 
ID:	16702

    In the below link I have already discussed on NATIONAL INSTRUMENT forum, they suggest "System exec VI" as shown in the picture above.
    "
    https://forums.ni.com/t5/LabVIEW/Sen...99296#M1106472

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •