Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: DIY teensy 3.5

  1. #1
    Junior Member
    Join Date
    Jun 2018
    Location
    Sinaloa Mexico
    Posts
    2

    DIY teensy 3.5

    Hello guys.


    I am currently building my own teensy 3.5 from the schematics found on this page.
    However, the mk20 must not have been understood in PJRC in order to program the teensy.
    How can I do it to work?
    Beforehand thank you very much.

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    20,306
    Are you using a MKL02 or MKL04 purchased from this page?

    https://www.pjrc.com/store/ic_mkl02.html

  3. #3
    Can you post your schmatic?

    To clarify what Paul is asking.
    The MKL02/ MKL04 chips (Only from PJRC) hold a custom bootloader that gets put into the main processor whenever you push the button. This allows for "brick proof" designing and testing as one would do on a Teensy,. From a regular distributor the MKL02 is just an empty chip.

  4. #4
    Junior Member
    Join Date
    Jun 2018
    Location
    Sinaloa Mexico
    Posts
    2
    Ya lo compramos y lo soldamos, solo que mi placa no encendio el led y no reconoce el usb =(

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •