T3.6 ADC channel identification

Status
Not open for further replies.

UHF

Well-known member
Hello, I've got two 16 channel muxs and I (naively) want to run them as fast as possible by running the signal from one mux to one of Teensy's ADCs and the other mux to the second ADC. The analog pins go to one of two ADCs that the MK66 chip has, I think. I found this https://forum.pjrc.com/attachment.php?attachmentid=15219&d=1543082009 in another thread. Am I right in thinking that the codes next to each analog pin (e.g. A23 1_10) refers to which of the two ADCs it's attached to? Thanks.
 
Status
Not open for further replies.
Back
Top