timseverance77
Member
Hi,
I am working with custom hardware that I designed using the Teensy 3.2 schematic with the MK20DX256VLH7 and the MKL02Z32VFG4 and I am thinking that the purchasing department accidentally placed empty MKL02 devices on the hardware.
I am noticing that the RESET_B pin of the MK20 is being held low I believe due to empty MKL02. I also noticed that the 16MHz oscillator is not oscillating.
Does anybody know if the oscillator stops oscillating when RESET_B is held low? Or is it more likely I am dealing with a bad oscillator setup?
Thanks.
Tim
I am working with custom hardware that I designed using the Teensy 3.2 schematic with the MK20DX256VLH7 and the MKL02Z32VFG4 and I am thinking that the purchasing department accidentally placed empty MKL02 devices on the hardware.
I am noticing that the RESET_B pin of the MK20 is being held low I believe due to empty MKL02. I also noticed that the 16MHz oscillator is not oscillating.
Does anybody know if the oscillator stops oscillating when RESET_B is held low? Or is it more likely I am dealing with a bad oscillator setup?
Thanks.
Tim