nateflanigan
Member
Hi, I've been messing around with some code for making a midi controller. I got a basic test to work with several code examples but no matter what the pot would only show from 0-60 on midi monitor. As a test i plugged the 5v pin directly in to the analog in pin I was using, sure enough it read 127. But when I hooked the pot back up it had stopped working. I've tried reloading the sketch, I've unplugged it and plugged it back in, I've tried loading the blink sketch (and got no blinking). The thing is the process of loading the code seems to go fine, the teensy just doesn't do anything. Did I fry my teensy? How can I test it?
Thanks
Thanks