I would like to work on an LED staff. I recently purchased a teensy 3.2 And I am working with six strips of 110 leds each- the strips are ws2812- I have tinkered a bit and I have no issues getting them powered on and even A test pattern going with the fast led library- But my biggest brick wall I am running into Is the coding part and bringing everything together.
I am wondering where I can find some help or if anyone is available to assist or provide guidance so that I can get to the final product?
My original motivation for this Was seeing a project on this site for an led staff But there doesn’t seem to be much out there in terms of getting from point A to point B. Appreciate any assistance And I have a link to the original idea below
https://www.pjrc.com/led-staff-with-1500-pixels/
I am wondering where I can find some help or if anyone is available to assist or provide guidance so that I can get to the final product?
My original motivation for this Was seeing a project on this site for an led staff But there doesn’t seem to be much out there in terms of getting from point A to point B. Appreciate any assistance And I have a link to the original idea below
https://www.pjrc.com/led-staff-with-1500-pixels/