I am new to teensy and Arduino stuff
I am using a Teensy 3.6 on Arduino 1.8.9
On my Mac OS there is no connection problems ever and everything works perfectly, but when ever I try to replicate those programs using VMWare Fusion running Ubuntu 64-bit 16.04.6 I have problems.
So I connect the teensy in to the system then upload the program. The program will upload without problem, but about 2 seconds later I will get the message :
The connection for the USB device 'Van Ooijen Technische Informatica Teensy MIDI' was unsuccessful. Driver Error.
Then it will refuse to upload until I unplug and replug in the teensy
Under Tools>Port The teensy port is gone until repluging in the teensy
I can get an output if the program is suppose to have a constant output and after uploading the program I unplug and replug then open the serial monitor
Any help would be appriciated
I am using a Teensy 3.6 on Arduino 1.8.9
On my Mac OS there is no connection problems ever and everything works perfectly, but when ever I try to replicate those programs using VMWare Fusion running Ubuntu 64-bit 16.04.6 I have problems.
So I connect the teensy in to the system then upload the program. The program will upload without problem, but about 2 seconds later I will get the message :
The connection for the USB device 'Van Ooijen Technische Informatica Teensy MIDI' was unsuccessful. Driver Error.
Then it will refuse to upload until I unplug and replug in the teensy
Under Tools>Port The teensy port is gone until repluging in the teensy
I can get an output if the program is suppose to have a constant output and after uploading the program I unplug and replug then open the serial monitor
Any help would be appriciated