No DMD with Teensy 3.2

Status
Not open for further replies.

Johnsy

New member
Whenever I try to connect to teensy 3.2/octo2811 to a USB port on my pinball x to screen setup and I try playing a table that has a DMD the b2s opens up but the DMD does not show. As soon as I disconnect the teensy from the USB port and I restart the table for example theater of magic and Addams family the DMD opens up again as it should on the b2s backglass. Any other table that has no DMD everything works fine. Is there anything that I am missing on my setup. Do you have any suggestions. Thank you.
 
Status
Not open for further replies.
Back
Top