So i just got a 3.6 which i tested on USB OK. Now i want to power it from an external source so i flipped it over and cut the track between H and central pad.
But it still powers up with just USB attached whereas my LC with the join removed does not
I've made many passes with a blade between the pads and examined it with a sight glass - hard to believe there is any viable join left. Do i need to do something else ?
But it still powers up with just USB attached whereas my LC with the join removed does not
I've made many passes with a blade between the pads and examined it with a sight glass - hard to believe there is any viable join left. Do i need to do something else ?