Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Lights control software

  1. #1
    Junior Member
    Join Date
    Aug 2019
    Posts
    2

    Lights control software

    Hello,
    actually I'm using led edit Software to control lights.

    Do you guys have some other software for lights control?

  2. #2
    Senior Member crees's Avatar
    Join Date
    Dec 2016
    Location
    Utah
    Posts
    168
    Jinx, gladiator, xlights are some the the free ones that I have personally used with teensy hardware. Madrix, resolume, Grand MA are other lighting application that can be use depending on the direction you go (artnet, sACN, Serial and DMX)

  3. #3
    Junior Member
    Join Date
    Aug 2019
    Posts
    2
    Quote Originally Posted by crees View Post
    Jinx, gladiator, xlights are some the the free ones that I have personally used with teensy hardware. Madrix, resolume, Grand MA are other lighting application that can be use depending on the direction you go (artnet, sACN, Serial and DMX)
    Which one of those softwares work with UCS2903?

  4. #4
    Senior Member crees's Avatar
    Join Date
    Dec 2016
    Location
    Utah
    Posts
    168
    The LED chip is dependent on the controller and not the software. The UCS2903 has near identical timing as the WS2811 chip. Since teensy uses the OCTOWS2811 library to control ws2811 LEDS you should be able to use that same library and function to control UCS2903 with little or no modification. Once you are able to program the teensy to communicate with the LED's then you can use a ethernet module W5200 with Pauls Ethernet adapter and interface it with the lighting software. Or you can try USB method. Both of these routes are code intensive and will require some decent knowledge of teensy and programming.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •