Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 7 of 7

Thread: Teensy 2.0?

  1. #1
    Senior Member
    Join Date
    Dec 2016
    Posts
    116

    Teensy 2.0?

    I just ran across the Teensy 2.0

    I actually like the look of the thing (Its tiny) for using as a controller. Is it like all the other Teensy, Feather & Arduino things that I can run Arduino code on?

    Specs?

    Thanks!

    -jim lee

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    9,012
    Look around on www.PJRC.COM - there are specs and tables for all of them.

    The Teensy 2 is as good as the other AVR 8 bit Arduino's and the functions offered by it's pins are perfectly compatible.

    You'd likely be better served by a more powerful Teensy LC or 3.2 or New Teensy 4 - each of which offers Arduino compatibility in the same 0.7x 1.4 inch size but ever increasing power and speed and available resource using a 32 bit microprocessor core.

  3. #3
    Senior Member
    Join Date
    Dec 2016
    Posts
    116
    I already use 3.2s like jellybeans. I just liked the 2.0 because is was a little bit smaller and about $4 cheaper. I figured it may be good for putting it into things that didn't need a lot of processor power.

    -jim lee

  4. #4
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    20,294
    Teensy LC has a significantly lower price than Teensy 2.0. It also has far more features, more memory, and better performance.

    But you answer your original question:

    Specs?
    Here's the page with hardware specs.

    https://www.pjrc.com/teensy/techspecs.html

    Still needs to be updated for the new Teensy 4.0, but the old info on Teensy 2.0 hasn't changed.

  5. #5
    Senior Member
    Join Date
    Dec 2016
    Posts
    116
    Thanks for the spect, that'll help a lot. ! I was mostly wondering if it programmed just like "everything else".

    -jim lee

  6. #6
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    20,294
    Yes, all the Teensy boards work with the Arduino software.

    Generally speaking, things work pretty much the same as other boards. That rather vague answer is the best anyone can say for this non-specific question.

  7. #7
    Junior Member
    Join Date
    Dec 2018
    Posts
    17
    That table could use a row with approximate power usage...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •