Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 5 of 5

Thread: Teensy 4.0

  1. #1
    Junior Member
    Join Date
    Aug 2019
    Posts
    2

    Teensy 4.0

    Hi there, just about to pull the pin on some Teensy 4.0's and it says not in stock. Can you give an approximate lead time please, or should I go after 3.2?

  2. #2
    Senior Member+ Theremingenieur's Avatar
    Join Date
    Feb 2014
    Location
    Colmar, France
    Posts
    2,530
    Fortunately for PJRC, the first two small T4 production batches were rapidly sold out. A huge third batch is currently in the oven and this temporary shortage should be overcome in September.

  3. #3
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    20,556
    If you place an order for Teensy 4.0 before Friday (while the website says out of stock), odds are pretty good you'll get one from the tail end of batch #2.

    We're completely out at this moment, but a small part of batch #2 still hasn't been completed. I've been told we'll get them Friday, which means we'll probably test/package/ship them Saturday and Tuesday (Monday is a USA holiday - no carriers are operating).

    Some were sent to distributors, like Adafruit and Sparkfun. Those will probably sell out quickly, but if your timing is right you may be able to get one there.

    Best estimate for batch #3 is looking like September 12.

    Of course, Teensy 3.2 is available. If you need something right now with certainty, get Teensy 3.2.

  4. #4
    Junior Member
    Join Date
    Aug 2019
    Posts
    2
    No thats fine, I will order them now. Need 4 so if not enough left I can hang till batch 3, thats cool.

  5. #5
    Junior Member
    Join Date
    Feb 2016
    Location
    Los Altos CA
    Posts
    6
    Any possibility for getting a Teensy 4.0 with the micro SD connector built in?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •