Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 1 of 1

Thread: octows2811 and teensy 4.0

  1. #1
    Junior Member
    Join Date
    Sep 2019
    Posts
    1

    octows2811 and teensy 4.0

    I'm adding adressable LED to my almost famous turbine powered minivan. I installed a larger alternator, a 2000 watt AC inverter and plan on using 110 vac to 5, 12, 30, 36 vdc depending on what LEDS I use. The power supplies will be close to the point of load.

    We're using a teesny 3.2 and an octows2811 now, from what I'm reading so far, the pinout on the octows2811 is incompatible with the teensy 4.0. Has anyone come up with a simple work around?



    https://github.com/FastLED/FastLED/wiki/Parallel-Output
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	firebrick.jpg 
Views:	1 
Size:	68.8 KB 
ID:	17527  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •