@defragster
I have seen the same thing when I do a verbose compile. From reading the IDE release notes I think that is intentional with the latest IDE.
@Paul - others? Re message posted here : pjrc.com/threads/57701-USB-Host-Ethernet-Driver
Anyone seeing extra stuff rebuilding on Rebuild with IDE 1.8.10 and TD 1.48.b1?
Or added new messages or library during build::
Code:Alternatives for USBHost_t36.h: [USBHost_t36@0.1] ResolveLibrary(USBHost_t36.h) -> candidates: [USBHost_t36@0.1]
Or indications of "Multiple libraries" where there is only a single present and no 2nd indicated::
Code:Multiple libraries were found for "ASIXEthernet.h" Used: T:\tCode\libraries\TeensyASIXEthernet
NOTE: Today it looks like @Paul has/is releasing Beta2 and it should have these changes now built in.
Along with some other changes, like I believe the change to SPI to work with applications that did not use SPI.beginTransaction on T4...
#include <Audio.h>
#include <Wire.h>
#include <SD.h>
#include <SPI.h>
#include <SerialFlash.h>
// GUItool: begin automatically generated code
AudioSynthWaveform waveform1; //xy=294,323
AudioEffectFreeverbStereo freeverbs1; //xy=592,499
AudioOutputI2S i2s1; //xy=756,481
AudioConnection patchCord1(waveform1, freeverbs1);
AudioConnection patchCord2(freeverbs1, 0, i2s1, 0);
AudioConnection patchCord3(freeverbs1, 1, i2s1, 1);
AudioControlSGTL5000 sgtl5000_1; //xy=805,363
// GUItool: end automatically generated code
int count=1;
int a1history=0;
void setup() {
// this is the offending line, and I'm not sure why it is necessary
// it can be placed anywhere within setup, it doesn't seem to matter
a1history = analogRead(A1);
AudioMemory(10);
Serial.begin(115200);
sgtl5000_1.enable();
sgtl5000_1.volume(0.3);
waveform1.begin(WAVEFORM_SINE);
delay(1000);
}
void loop() {
Serial.print("Beep #");
Serial.println(count);
Serial.println(AudioProcessorUsageMax());
AudioProcessorUsageMaxReset();
count = count + 1;
waveform1.frequency(440);
waveform1.amplitude(0.9);
wait(250);
waveform1.amplitude(0);
wait(1750);
}
void wait(unsigned int milliseconds)
{
delay(milliseconds);
}
I am using arduino 1.8.10, with the teensyloader 1.48-beta1.
1.48-beta1 is haunted by evil spirits. upgrade to 1.48-beta2 or beta3
https://forum.pjrc.com/threads/57894-Teensyduino-1-48-Beta-3