Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Teensy 4.0: Access to second LED?

  1. #1
    Junior Member
    Join Date
    Oct 2017
    Posts
    11

    Teensy 4.0: Access to second LED?

    When Teensy 4.0 is going to be programmed through Teensyduino, you can see a little red LED flickering.

    Ist it possible to control this LED by my own code, like the other LED on pin 13?

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    20,684
    No, sorry, that red LED is not connected to any pin on the main chip.

    Here's the schematic.

    https://www.pjrc.com/teensy/schematic.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •