I did some tests with my Teensy 4 to count the frequency of my transceiver this work till 21MHz, above I get no readings. (0.0)
I use input 9 as input and use a small interface.
The count looks like this count= 7001.00 but my transceiver is set on 7001.350 so I miss some digits.
What can I do ? a bit weird that I must divide by 2 to get the right value too.
Who can help me with this ....
if (FreqCount.available()) {
unsigned long count = FreqCount.read();
Serial.print("count= ");
Serial.println(count /2);
}
I use input 9 as input and use a small interface.
The count looks like this count= 7001.00 but my transceiver is set on 7001.350 so I miss some digits.
What can I do ? a bit weird that I must divide by 2 to get the right value too.
Who can help me with this ....
if (FreqCount.available()) {
unsigned long count = FreqCount.read();
Serial.print("count= ");
Serial.println(count /2);
}