quarterturn
Well-known member
I have code here: https://github.com/quarterturn/teensy3-string-machine/tree/master which compiles with no errors on Arduino 1.8.8 yet apparently crashes on my Teensy 3.6. I can't get a Serial.println() or even an LED blink out of it.
I'm using the audio library and have an 'ambitious' amount of waveforms and envelopes - 16 each. I've tried a number of different audio memory settings without success. Other programs using the hardware (Blackaddr audio adapter) and my library "AudioEffectEnsemble" work fine.
Is there anything else other than commenting out stuff until it works again? I have a J-Link Segger EDU (which I'm a novice at using) - could it be used with the Teensy 3.6?
I'm using the audio library and have an 'ambitious' amount of waveforms and envelopes - 16 each. I've tried a number of different audio memory settings without success. Other programs using the hardware (Blackaddr audio adapter) and my library "AudioEffectEnsemble" work fine.
Is there anything else other than commenting out stuff until it works again? I have a J-Link Segger EDU (which I'm a novice at using) - could it be used with the Teensy 3.6?