Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 1 of 1

Thread: Getting Started with Audio for T4

  1. #1

    Getting Started with Audio for T4

    Hi, I am connecting a T4 to a Xilinx S7 FPGA by the T4's I2S link (DOUT2, LRCLK2, BCLK2, DIN2), so I2S link 2.
    I don't have any audio shield, so cannot work directly from the examples given.

    I want to use it in the same way like Serial.Print() and Serial.Read() as employed for the UART signals.
    And I want to base it as the main interrupt point to my main loop(0 routine, example

    void loop() {

    if (I2S.available() > 0) {

    ....
    ...
    ...
    ...
    }

    }


    How to proceed, any tips are very welcome.

    PS - for the FPGA I don't require help for that since that is my bread and butter.
    Last edited by ChrisAldridge; 09-27-2019 at 05:04 AM. Reason: quoted wrong Teensy device

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •