Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: I made a Teensy 3.2 clone with a detachable bootloader. An all-around success.

  1. #1
    Junior Member
    Join Date
    Apr 2021
    Location
    Oslo
    Posts
    5

    I made a Teensy 3.2 clone with a detachable bootloader. An all-around success.

    I wanted to be able to program multiple boards with just one bootloader, so I designed my own (2-layer) Teensy 3.2 with a detachable bootloader. Of course after accomplishing my goal, I decided to go with a completely different solution and decided to abandon this one. But this project was still an all-around success.

    Click image for larger version. 

Name:	1.jpg 
Views:	83 
Size:	74.1 KB 
ID:	24790
    Click image for larger version. 

Name:	3.jpg 
Views:	61 
Size:	70.9 KB 
ID:	24791
    Click image for larger version. 

Name:	r8.png 
Views:	64 
Size:	82.5 KB 
ID:	24798


    Blinking two LEDs:

    https://youtu.be/t1FWuDLurek
    Last edited by Pea-Otter; 05-17-2021 at 01:24 PM. Reason: added a short video

  2. #2
    seems like a very custom form factor. What's the application?

  3. #3
    Junior Member
    Join Date
    Apr 2021
    Location
    Oslo
    Posts
    5
    Reading hall effect sensors (using one or two multiplexers) embedded in an art installation/sculpture.
    Last edited by Pea-Otter; 05-17-2021 at 02:53 PM.

  4. #4
    Senior Member
    Join Date
    May 2015
    Location
    USA
    Posts
    1,000
    I encourage you to publish all the files - schematic, PCM design, BOM, etc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •