can you share the i2c interface with the audio library?

Status
Not open for further replies.

scharkalvin

Member
Can I use the "wire0" i2c pins with another i2c device (IE: Si5351 clock gen) while using the audio library with the Teensy Audio board?
 
Can I use the "wire0" i2c pins with another i2c device (IE: Si5351 clock gen) while using the audio library with the Teensy Audio board?

You should be able to as long as you don't use a device with either 0x0A (SGTL5000) or 0x1A (WM8731) addresses, since those are on the audio board. The audio board has pull-up resistors on it, so you don't have to add pull-up resistors on the Teensy. I imagine there might be a few problematic devices, but it should work.
 
Status
Not open for further replies.
Back
Top