LittleFS port to Teensy/SPIFlash

defragster · Nov 11, 2020

back in a bit ...

sketch:

Code:

#include "Arduino.h"
#define use_spi_disk
//#define use_qspi_disk
//#define use_ram_disk
DMAMEM char my_buffer[400000];

  #include "MTP.h"
  #include "usb1_mtp.h"

  MTPStorage_SPI storage;
  //MTPStorage_QSPI storage;
  //MTPStorage_RAM storage;
  MTPD       mtpd(&storage);


void logg(uint32_t del, const char *txt)
{ static uint32_t to;
  if(millis()-to > del)
  {
    //Serial.println(txt); 
#if USE_SDIO==1
    digitalWriteFast(2,!digitalReadFast(2));
#endif
    to=millis();
  }
}

void setup()
{ 
  while(!Serial && millis()<2000); 
  usb_mtp_configure();
    //if(!Storage_init_qspi()) {Serial.println("No storage"); while(1);};
    if(!Storage_init_spi(10, SPI)) {Serial.println("No storage"); while(1);};
    //if(!Storage_init_ram(my_buffer, sizeof(my_buffer))) {Serial.println("No storage"); while(1);};

  Serial.println("MTP test");

#if USE_SDIO==1
  pinMode(2,OUTPUT);
#endif

}

void loop()
{ 
  mtpd.loop();

  logg(1000,"loop");
  //asm("wfi"); // may wait forever on T4.x
}

ALL VERBOSE from CLEAN build:

Code:

Temp: "T:\TEMP\\arduino_build_mtp-test.ino"
Temp: "T:\TEMP\\arduino_cache_mtp-test.ino"
Temporary files deleted.
Building Sketch: ".\mtp-test.ino"
Using board 'teensy40' from platform in folder: T:\arduino-1.8.13_t54\hardware\teensy\avr
Using core 'teensy4' from platform in folder: T:\arduino-1.8.13_t54\hardware\teensy\avr
Detecting libraries used...
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for MTP.h: [MTP_t4_littlefs@1.0.0-beta.1]
ResolveLibrary(MTP.h)
  -> candidates: [MTP_t4_littlefs@1.0.0-beta.1]
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for LittleFS.h: [LittleFS-main@1.0.0]
ResolveLibrary(LittleFS.h)
  -> candidates: [LittleFS-main@1.0.0]
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for SPI.h: [SPI@1.0]
ResolveLibrary(SPI.h)
  -> candidates: [SPI@1.0]
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for usb1_mtp.h: [USB2@0.9.0-beta.1]
ResolveLibrary(usb1_mtp.h)
  -> candidates: [USB2@0.9.0-beta.1]
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\MTP.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for TimeLib.h: [Time@1.6]
ResolveLibrary(TimeLib.h)
  -> candidates: [Time@1.6]
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage_QSPI.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage_RAM.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage_SPI.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\LittleFS-main\\src\\LittleFS.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\LittleFS-main\\src\\littlefs\\lfs.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\LittleFS-main\\src\\littlefs\\lfs_util.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI\\SPI.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb1_mtp.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2_desc.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2_mtp.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2_seremu.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2_serial.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time\\DateStrings.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time\\Time.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Generating function prototypes...
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE
"T:\\arduino-1.8.13_t54\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "T:\\TEMP\\arduino_build_mtp-test.ino\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/precompile_helper" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr/cores/teensy4" "T:\\TEMP\\arduino_build_mtp-test.ino" "T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -x c++-header -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr/cores/teensy4" "T:\\TEMP\\arduino_build_mtp-test.ino/pch/Arduino.h" -o "T:\\TEMP\\arduino_build_mtp-test.ino/pch/Arduino.h.gch"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp.o"
Compiling libraries...
Compiling library "MTP_t4_littlefs"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\Storage.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage_SPI.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\Storage_SPI.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\MTP.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\MTP.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage_RAM.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\Storage_RAM.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\MTP_t4_littlefs\\src\\Storage_QSPI.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\Storage_QSPI.cpp.o"
Compiling library "LittleFS-main"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\LittleFS-main\\src\\LittleFS.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\LittleFS-main\\LittleFS.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\LittleFS-main\\src\\littlefs\\lfs_util.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\LittleFS-main\\littlefs\\lfs_util.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\LittleFS-main\\src\\littlefs\\lfs.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\LittleFS-main\\littlefs\\lfs.c.o"
Compiling library "SPI"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI\\SPI.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\SPI\\SPI.cpp.o"
Compiling library "USB2"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb1_mtp.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb1_mtp.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2_desc.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2_desc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2_serial.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2_serial.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2_mtp.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2_mtp.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\tCode\\libraries\\USB2\\src\\usb2_seremu.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2_seremu.c.o"
Compiling library "Time"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time\\DateStrings.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\Time\\DateStrings.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "-IT:\\tCode\\libraries\\MTP_t4_littlefs\\src" "-IT:\\tCode\\libraries\\LittleFS-main\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\SPI" "-IT:\\tCode\\libraries\\USB2\\src" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\libraries\\Time\\Time.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\Time\\Time.cpp.o"
Compiling core...
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -x assembler-with-cpp -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\memcpy-armv7m.S" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\memcpy-armv7m.S.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -x assembler-with-cpp -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\memset.S" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\memset.S.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\eeprom.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\eeprom.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\extmem.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\extmem.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\delay.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\delay.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\bootdata.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\bootdata.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\debugprintf.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\debugprintf.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\digital.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\digital.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\clockspeed.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\clockspeed.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\analog.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\analog.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\interrupt.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\interrupt.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\keylayouts.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\keylayouts.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\nonstd.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\nonstd.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\pwm.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\pwm.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\rtc.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\rtc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_alloc_valid.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_alloc_valid.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_calloc.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_calloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_free.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_free.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_hash.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_hash.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_malloc.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_malloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_malloc_stats.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_malloc_stats.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_pool.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_pool.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_realloc.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_realloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_realloc_i.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_realloc_i.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_realloc_move.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_realloc_move.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_szalloc.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_szalloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_util.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_util.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\sm_zalloc.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_zalloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\startup.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\startup.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\tempmon.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\tempmon.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_desc.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_desc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_joystick.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_joystick.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_keyboard.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_keyboard.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_midi.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_midi.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_mouse.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_mouse.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_rawhid.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_rawhid.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_seremu.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_seremu.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_serial.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_serial.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_serial2.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_serial2.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_touch.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_touch.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_serial3.c" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_serial3.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial4.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial4.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\DMAChannel.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\DMAChannel.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial1.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial1.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\AudioStream.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\AudioStream.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial3.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial3.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\EventResponder.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\EventResponder.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial2.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial2.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial5.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial5.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial6.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial6.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial8.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial8.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\HardwareSerial7.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial7.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\IPAddress.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\IPAddress.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\IntervalTimer.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\IntervalTimer.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\Print.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\Print.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\Stream.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\Stream.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\Tone.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\Tone.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\WMath.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\WMath.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\WString.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\WString.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\main.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\main.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\new.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\new.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent1.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent1.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent2.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent2.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent3.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent3.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent4.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent4.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent5.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent5.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent6.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent6.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent7.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent7.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEvent8.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent8.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEventUSB1.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEventUSB1.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\serialEventUSB2.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEventUSB2.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_audio.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_audio.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_flightsim.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_flightsim.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\usb_inst.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_inst.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10600 -DARDUINO_TEENSY40 -DF_CPU=396000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IT:\\TEMP\\arduino_build_mtp-test.ino/pch" "-IT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4" "T:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4\\yield.cpp" -o "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\yield.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\memcpy-armv7m.S.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\memset.S.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\analog.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\bootdata.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\clockspeed.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\debugprintf.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\delay.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\digital.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\eeprom.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\extmem.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\interrupt.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\keylayouts.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\nonstd.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\pwm.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\rtc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_alloc_valid.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_calloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_free.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_hash.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_malloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_malloc_stats.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_pool.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_realloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_realloc_i.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_realloc_move.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_szalloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_util.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\sm_zalloc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\startup.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\tempmon.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_desc.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_joystick.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_keyboard.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_midi.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_mouse.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_rawhid.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_seremu.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_serial.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_serial2.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_serial3.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_touch.c.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\AudioStream.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\DMAChannel.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\EventResponder.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial1.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial2.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial3.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial4.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial5.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial6.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial7.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\HardwareSerial8.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\IPAddress.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\IntervalTimer.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\Print.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\Stream.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\Tone.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\WMath.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\WString.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\main.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\new.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent1.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent2.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent3.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent4.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent5.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent6.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent7.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEvent8.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEventUSB1.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\serialEventUSB2.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_audio.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_flightsim.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\usb_inst.cpp.o"
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc-ar" rcs "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\core.a" "T:\\TEMP\\arduino_build_mtp-test.ino\\core\\yield.cpp.o"
Archiving built core (caching) in: T:\TEMP\arduino_cache_mtp-test.ino\core\core_teensy_avr_teensy40_usb_mtp,speed_396,opt_o2std,keys_en-us_4236bb8dbca77b8193cb3c4ae6edbf3a.a
Linking everything together...
"T:\\arduino-1.8.13_t54\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -O2 -Wl,--gc-sections,--relax "-TT:\\arduino-1.8.13_t54\\hardware\\teensy\\avr\\cores\\teensy4/imxrt1062.ld" -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -o "T:\\TEMP\\arduino_build_mtp-test.ino/mtp-test.ino.elf" "T:\\TEMP\\arduino_build_mtp-test.ino\\sketch\\mtp-test.ino.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\MTP.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\Storage.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\Storage_QSPI.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\Storage_RAM.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\MTP_t4_littlefs\\Storage_SPI.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\LittleFS-main\\LittleFS.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\LittleFS-main\\littlefs\\lfs.c.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\LittleFS-main\\littlefs\\lfs_util.c.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\SPI\\SPI.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb1_mtp.c.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2.c.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2_desc.c.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2_mtp.c.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2_seremu.c.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\USB2\\usb2_serial.c.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\Time\\DateStrings.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino\\libraries\\Time\\Time.cpp.o" "T:\\TEMP\\arduino_build_mtp-test.ino/core\\core.a" "-LT:\\TEMP\\arduino_build_mtp-test.ino" -larm_cortexM7lfsp_math -lm -lstdc++
T:\TEMP\arduino_build_mtp-test.ino\libraries\MTP_t4_littlefs\Storage_QSPI.cpp.o: In function `mtp_yield()':
T:\tCode\libraries\MTP_t4_littlefs\src/Storage_QSPI.cpp:59: multiple definition of `mtp_yield()'
T:\TEMP\arduino_build_mtp-test.ino\libraries\MTP_t4_littlefs\Storage.cpp.o:T:\tCode\libraries\MTP_t4_littlefs\src/Storage.cpp:95: first defined here
t:/arduino-1.8.13_t54/hardware/tools/arm/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld.exe: Disabling relaxation: it will not work with multiple definitions
T:\TEMP\arduino_build_mtp-test.ino\libraries\MTP_t4_littlefs\Storage_QSPI.cpp.o: In function `Print::Print()':
T:\tCode\libraries\LittleFS-main\src/LittleFS.h:110: multiple definition of `mtp_lock_storage(bool)'
T:\TEMP\arduino_build_mtp-test.ino\libraries\MTP_t4_littlefs\Storage.cpp.o:T:\arduino-1.8.13_t54\hardware\teensy\avr\cores\teensy4/FS.h:125: first defined here
collect2.exe: error: ld returned 1 exit status
Using library MTP_t4_littlefs at version 1.0.0-beta.1 in folder: T:\tCode\libraries\MTP_t4_littlefs 
Using library LittleFS-main at version 1.0.0 in folder: T:\tCode\libraries\LittleFS-main 
Using library SPI at version 1.0 in folder: T:\arduino-1.8.13_t54\hardware\teensy\avr\libraries\SPI 
Using library USB2 at version 0.9.0-beta.1 in folder: T:\tCode\libraries\USB2 
Using library Time at version 1.6 in folder: T:\arduino-1.8.13_t54\hardware\teensy\avr\libraries\Time 
exit status 1
[Finished in 13.9s with exit code 1]
[shell_cmd: .\Compile.cmd 2]
[dir: T:\tCode\libraries\MTP_t4_littlefs\examples\mtp-test]
[path: C:\Program Files\Microsoft MPI\Bin\;C:\ProgramData\Oracle\Java\javapath;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Program Files\Crucial\Crucial Storage Executive;C:\Program Files\dotnet\;C:\Program Files\Microsoft SQL Server\130\Tools\Binn\;C:\Program Files (x86)\Windows Kits\10\Windows Performance Toolkit\;C:\Program Files\PuTTY\;C:\Program Files (x86)\IncrediBuild;C:\Program Files\Git\cmd;C:\Program Files\Microsoft SQL Server\Client SDK\ODBC\170\Tools\Binn\;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Users\Tim\AppData\Local\Mu\bin;C:\Users\Tim\AppData\Local\Microsoft\WindowsApps;C:\Users\Tim\AppData\Local\GitHubDesktop\bin;T:\Programs\Microsoft VS Code\bin;C:\Users\Tim\AppData\Local\atom\bin;C:\MinGW\bin;C:\Users\Tim\AppData\Local\Microsoft\WindowsApps;T:\Programs;]

mjs513 · Nov 11, 2020

@defragster
Just tried your version of the sketch. Compiled no issues on a T4.0 with my Winbond breakout board. Here is complete compile verbose (dont see clean in Aduino IDE don't see any difference except you are getting errors and I am not. You sure you don't have some old files in the MTP_t4_littleFS directory?

Code:

F:\arduino-1.8.13-beta4\arduino-builder -dump-prefs -logger=machine -hardware F:\arduino-1.8.13-beta4\hardware -hardware C:\Users\Merli\AppData\Local\Arduino15\packages -tools F:\arduino-1.8.13-beta4\tools-builder -tools F:\arduino-1.8.13-beta4\hardware\tools\avr -tools C:\Users\Merli\AppData\Local\Arduino15\packages -built-in-libraries F:\arduino-1.8.13-beta4\libraries -libraries D:\Users\Merli\Documents\Arduino\libraries -fqbn=teensy:avr:teensy40:usb=mtp,speed=450,opt=o2std,keys=en-us -ide-version=10813 -build-path C:\Users\Merli\AppData\Local\Temp\arduino_build_326910 -warnings=none -build-cache C:\Users\Merli\AppData\Local\Temp\arduino_cache_904040 -verbose D:\Users\Merli\Documents\Arduino\libraries\MTP_t4_littlefs\examples\mtp-test\mtp-test.ino
F:\arduino-1.8.13-beta4\arduino-builder -compile -logger=machine -hardware F:\arduino-1.8.13-beta4\hardware -hardware C:\Users\Merli\AppData\Local\Arduino15\packages -tools F:\arduino-1.8.13-beta4\tools-builder -tools F:\arduino-1.8.13-beta4\hardware\tools\avr -tools C:\Users\Merli\AppData\Local\Arduino15\packages -built-in-libraries F:\arduino-1.8.13-beta4\libraries -libraries D:\Users\Merli\Documents\Arduino\libraries -fqbn=teensy:avr:teensy40:usb=mtp,speed=450,opt=o2std,keys=en-us -ide-version=10813 -build-path C:\Users\Merli\AppData\Local\Temp\arduino_build_326910 -warnings=none -build-cache C:\Users\Merli\AppData\Local\Temp\arduino_cache_904040 -verbose D:\Users\Merli\Documents\Arduino\libraries\MTP_t4_littlefs\examples\mtp-test\mtp-test.ino
Using board 'teensy40' from platform in folder: F:\arduino-1.8.13-beta4\hardware\teensy\avr
Using core 'teensy4' from platform in folder: F:\arduino-1.8.13-beta4\hardware\teensy\avr
Detecting libraries used...
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10813 -DARDUINO_TEENSY40 -DF_CPU=450000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\cores\\teensy4" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for MTP.h: [MTP_t4_littlefs@1.0.0-beta.1]
ResolveLibrary(MTP.h)
  -> candidates: [MTP_t4_littlefs@1.0.0-beta.1]
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10813 -DARDUINO_TEENSY40 -DF_CPU=450000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\cores\\teensy4" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\MTP_t4_littlefs\\src" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for LittleFS.h: [LittleFS-main@1.0.0]
ResolveLibrary(LittleFS.h)
  -> candidates: [LittleFS-main@1.0.0]
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10813 -DARDUINO_TEENSY40 -DF_CPU=450000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\cores\\teensy4" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\MTP_t4_littlefs\\src" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\LittleFS-main\\src" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for SPI.h: [SPI@1.0]
ResolveLibrary(SPI.h)
  -> candidates: [SPI@1.0]
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10813 -DARDUINO_TEENSY40 -DF_CPU=450000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\cores\\teensy4" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\MTP_t4_littlefs\\src" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\LittleFS-main\\src" "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\libraries\\SPI" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for usb1_mtp.h: [USB2-master@0.9.0-beta.1]
ResolveLibrary(usb1_mtp.h)
  -> candidates: [USB2-master@0.9.0-beta.1]
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10813 -DARDUINO_TEENSY40 -DF_CPU=450000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\cores\\teensy4" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\MTP_t4_littlefs\\src" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\LittleFS-main\\src" "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\libraries\\SPI" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\USB2-master\\src" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\MTP_t4_littlefs\src\MTP.cpp
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\MTP_t4_littlefs\src\Storage_QSPI.cpp
Alternatives for TimeLib.h: [Time@1.6]
ResolveLibrary(TimeLib.h)
  -> candidates: [Time@1.6]
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\MTP_t4_littlefs\src\Storage_RAM.cpp
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\MTP_t4_littlefs\src\Storage_SPI.cpp
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\LittleFS-main\src\LittleFS.cpp
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\LittleFS-main\src\littlefs\lfs.c
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\LittleFS-main\src\littlefs\lfs_util.c
Using cached library dependencies for file: F:\arduino-1.8.13-beta4\hardware\teensy\avr\libraries\SPI\SPI.cpp
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\USB2-master\src\usb1_mtp.c
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\USB2-master\src\usb2.c
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\USB2-master\src\usb2_desc.c
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\USB2-master\src\usb2_mtp.c
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\USB2-master\src\usb2_seremu.c
Using cached library dependencies for file: D:\Users\Merli\Documents\Arduino\libraries\USB2-master\src\usb2_serial.c
Using cached library dependencies for file: F:\arduino-1.8.13-beta4\hardware\teensy\avr\libraries\Time\DateStrings.cpp
Using cached library dependencies for file: F:\arduino-1.8.13-beta4\hardware\teensy\avr\libraries\Time\Time.cpp
Generating function prototypes...
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -E -CC -x c++ -w -g -Wall -ffunction-sections -fdata-sections -nostdlib -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10813 -DARDUINO_TEENSY40 -DF_CPU=450000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\cores\\teensy4" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\MTP_t4_littlefs\\src" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\LittleFS-main\\src" "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\libraries\\SPI" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\USB2-master\\src" "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\libraries\\Time" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp" -o "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE
"F:\\arduino-1.8.13-beta4\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/precompile_helper" "F:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr/cores/teensy4" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910" "F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -x c++-header -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10813 -DARDUINO_TEENSY40 -DF_CPU=450000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr/cores/teensy4" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/pch/Arduino.h" -o "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/pch/Arduino.h.gch"
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\pch\Arduino.h.gch
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-g++" -c -O2 -g -Wall -ffunction-sections -fdata-sections -nostdlib -MMD -std=gnu++14 -fno-exceptions -fpermissive -fno-rtti -fno-threadsafe-statics -felide-constructors -Wno-error=narrowing -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -D__IMXRT1062__ -DTEENSYDUINO=154 -DARDUINO=10813 -DARDUINO_TEENSY40 -DF_CPU=450000000 -DUSB_MTPDISK -DLAYOUT_US_ENGLISH "-IC:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/pch" "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\cores\\teensy4" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\MTP_t4_littlefs\\src" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\LittleFS-main\\src" "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\libraries\\SPI" "-ID:\\Users\\Merli\\Documents\\Arduino\\libraries\\USB2-master\\src" "-IF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\libraries\\Time" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp" -o "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp.o"
Compiling libraries...
Compiling library "MTP_t4_littlefs"
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\MTP_t4_littlefs\MTP.cpp.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\MTP_t4_littlefs\Storage_SPI.cpp.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\MTP_t4_littlefs\Storage_QSPI.cpp.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\MTP_t4_littlefs\Storage_RAM.cpp.o
Compiling library "LittleFS-main"
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\LittleFS-main\LittleFS.cpp.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\LittleFS-main\littlefs\lfs_util.c.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\LittleFS-main\littlefs\lfs.c.o
Compiling library "SPI"
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\SPI\SPI.cpp.o
Compiling library "USB2-master"
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\USB2-master\usb2.c.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\USB2-master\usb1_mtp.c.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\USB2-master\usb2_desc.c.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\USB2-master\usb2_seremu.c.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\USB2-master\usb2_serial.c.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\USB2-master\usb2_mtp.c.o
Compiling library "Time"
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\Time\DateStrings.cpp.o
Using previously compiled file: C:\Users\Merli\AppData\Local\Temp\arduino_build_326910\libraries\Time\Time.cpp.o
Compiling core...
Using precompiled core: C:\Users\Merli\AppData\Local\Temp\arduino_cache_904040\core\core_teensy_avr_teensy40_usb_mtp,speed_450,opt_o2std,keys_en-us_2a30e982e8360a8ed2d448ad4b95bafe.a
Linking everything together...
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-gcc" -O2 -Wl,--gc-sections,--relax "-TF:\\arduino-1.8.13-beta4\\hardware\\teensy\\avr\\cores\\teensy4/imxrt1062.ld" -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16 -o "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.elf" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\sketch\\mtp-test.ino.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\MTP_t4_littlefs\\MTP.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\MTP_t4_littlefs\\Storage_QSPI.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\MTP_t4_littlefs\\Storage_RAM.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\MTP_t4_littlefs\\Storage_SPI.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\LittleFS-main\\LittleFS.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\LittleFS-main\\littlefs\\lfs.c.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\LittleFS-main\\littlefs\\lfs_util.c.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\SPI\\SPI.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\USB2-master\\usb1_mtp.c.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\USB2-master\\usb2.c.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\USB2-master\\usb2_desc.c.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\USB2-master\\usb2_mtp.c.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\USB2-master\\usb2_seremu.c.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\USB2-master\\usb2_serial.c.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\Time\\DateStrings.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910\\libraries\\Time\\Time.cpp.o" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/..\\arduino_cache_904040\\core\\core_teensy_avr_teensy40_usb_mtp,speed_450,opt_o2std,keys_en-us_2a30e982e8360a8ed2d448ad4b95bafe.a" "-LC:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910" -larm_cortexM7lfsp_math -lm -lstdc++
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.elf" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.eep"
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-objcopy" -O ihex -R .eeprom "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.elf" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.hex"
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/stdout_redirect" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.lst" "F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-objdump" -d -S -C "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.elf"
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/stdout_redirect" "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.sym" "F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-objdump" -t -C "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.elf"
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/teensy_post_compile" -file=mtp-test.ino "-path=C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910" "-tools=F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/" -board=TEENSY40
Using library MTP_t4_littlefs at version 1.0.0-beta.1 in folder: D:\Users\Merli\Documents\Arduino\libraries\MTP_t4_littlefs 
Using library LittleFS-main at version 1.0.0 in folder: D:\Users\Merli\Documents\Arduino\libraries\LittleFS-main 
Using library SPI at version 1.0 in folder: F:\arduino-1.8.13-beta4\hardware\teensy\avr\libraries\SPI 
Using library USB2-master at version 0.9.0-beta.1 in folder: D:\Users\Merli\Documents\Arduino\libraries\USB2-master 
Using library Time at version 1.6 in folder: F:\arduino-1.8.13-beta4\hardware\teensy\avr\libraries\Time 
"F:\\arduino-1.8.13-beta4\\hardware\\teensy/../tools/arm/bin/arm-none-eabi-size" -A "C:\\Users\\Merli\\AppData\\Local\\Temp\\arduino_build_326910/mtp-test.ino.elf"
Sketch uses 70416 bytes (3%) of program storage space. Maximum is 2031616 bytes.
Global variables use 103092 bytes (19%) of dynamic memory, leaving 421196 bytes for local variables. Maximum is 524288 bytes.

defragster · Nov 11, 2020

Well that was a bunch of stuff ...

Thought I had just killed that folder and restored from ZIP ... did that again.

It now builds and still won't be anything but : "Unavailable"

I just noticed lib ... USB2 ... maybe my copy is old:

Code:

Using library MTP_t4_littlefs at version 1.0.0-beta.1 in folder: D:\Users\Merli\Documents\Arduino\libraries\MTP_t4_littlefs 
Using library LittleFS-main at version 1.0.0 in folder: D:\Users\Merli\Documents\Arduino\libraries\LittleFS-main 
Using library SPI at version 1.0 in folder: F:\arduino-1.8.13-beta4\hardware\teensy\avr\libraries\SPI 
Using library USB2-master at version 0.9.0-beta.1 in folder: D:\Users\Merli\Documents\Arduino\libraries\USB2-master

Need to get an update for that ...

mjs513 · Nov 11, 2020

I know this is going to sound strange but 2things 1: check your connections and maybe lower the clock to 450 just in case

defragster · Nov 11, 2020

WORKING ... I WANTED CSpin #6 ... so use FLASH not SD ... oops

I was using speed 396

I CAN READ the TEST files from my LFSintegrity sketch.

using : github.com/WMXZ-EU/USB2

defragster · Nov 11, 2020

At usb.c line 1000 this works at 600 MHz:

Code:

uint32_t usb_transfer_status(const transfer_t *transfer)
{
[B][COLOR="#FF0000"]#ifdef USB_MTPDISK[/COLOR][/B]
	uint32_t status, cmd;
	//int count=0;
	cmd = USB1_USBCMD;

mjs513 · Nov 11, 2020

Great news that you got it working! Was beginning to get worried.

Will the conflict with mtp_t4 tomoorow

defragster · Nov 11, 2020

That is the FIRST time I've seen MTP work properly as a normal drive!

mjs513 · Nov 11, 2020

To be honest never noticed. Know I had to play with Scandir function... used Paul’s print directory as part of that setup and created my own structure. Then I let it create the file index.

Remember rename doesn’t work since there is nothing equivalent in littlest. Should work better when qspi is fixed. Haven’t tested delete. Think copy and pasting from pc works.

defragster · Nov 11, 2020

Good to work/play/test now it seems. The original MTP didn't show for here until I loaded some dumb interface I mentioned - and it was a kludge and I hadn't ever kept up with it since then.

ODD: Win 10 shows 500MB free on 1.95GB Teensy MTP drive? - that is a 16 MB flash?

Looking forward to next update.

Just looking at post #205: >> cmd = USB1_USBCMD;
Is that where that USB2 LIB comes into play?

mjs513 · Nov 11, 2020

Yeah 500mb. Was a hard coded kludge until I can figure out to get men usuage for flash and not sure what to do for ram

As for usb2 not sure may have to dig into mtp.cpp

defragster · Nov 12, 2020

Prior MTP on T_4.0 w/AUDIO Flash worked.

Ran same code on T_4.1 where it has run on an image some ~20 hours with the Integrity test extending, deleting, adding files on root and 10 subdirs. All was well in that LittleFS sketch.

Putting the MTP sketch from 4.0 to 4.1 failed to show any files? TyComm had some short spew on 1's with waits between - but no files ever showed. Maybe ~280 was too many?

Returned to 'SPI' Integrity test and did 'f'ormat and one '1' run to create dirs and about 2 files in each - then uploaded the mtp-test.ino and it it showing those .txt files I can open and see to be right.

silly side note: added 'm' to Integrity test to start MTP and do the MTP.loop() on a 1s timer - but it failed to compile as it was pulling in both LittleFS aware libs and had dupes of the LittleFS code included in 'MTP_t4_littlefs'

But the good news is the Intergrity test ran overnight and longer with no issues on the SPI FLASH on the T_4.1 Audio card. So when the timing details work out for QSPI it should be good.

mjs513 · Nov 12, 2020

defragster said:
Putting the MTP sketch from 4.0 to 4.1 failed to show any files? TyComm had some short spew on 1's with waits between - but no files ever showed. Maybe ~280 was too many?

Could be - have a limit of 128 files in my implementation - just boosted to 800 so we will see if that works. Should be in the next revision.

Cool that its working.

mjs513 · Nov 12, 2020

Have a quick question for you all.

LittleFS_SPIFlash, for example, has the chip size stored in a structure info but I don't think I can get access to it from MTP which makes it difficult to look at space.

Anybody have any idea how to do that?

KurtE · Nov 12, 2020

FYI - the change to usb.c made mine work also

Side note:
I edited your example to hopefully only have to change the #define at the top for which storage to use... Also used the Arduino format of the code...
So far I have only tried the SPI version to prop shield on T4.1

Code:

#include "Arduino.h"
#define use_spi_disk
//#define use_qspi_disk
//#define use_ram_disk

#include "MTP.h"
#include "usb1_mtp.h"

#if defined(use_spi_disk)
MTPStorage_SPI storage;
#elif defined(use_qspi_disk)
MTPStorage_QSPI storage;
#elif defined(use_ram_disk)
DMAMEM char my_buffer[400000];
MTPStorage_RAM storage;
#else
#error "Need to define one of the storage classes to use"
#endif
MTPD       mtpd(&storage);


void logg(uint32_t del, const char *txt)
{ static uint32_t to;
  if (millis() - to > del)
  {
    //Serial.println(txt);
#if USE_SDIO==1
    digitalWriteFast(2, !digitalReadFast(2));
#endif
    to = millis();
  }
}

void setup()
{
  while (!Serial && millis() < 2000);
  usb_mtp_configure();
#if defined(use_spi_disk)
  if (!Storage_init_spi(6, SPI)) {
    Serial.println("No storage");
    while (1);
  };
#elif defined(use_qspi_disk)
  if (!Storage_init_qspi()) {
    Serial.println("No storage");
    while (1);
  };
#elif defined(use_ram_disk)
  if (!Storage_init_ram(my_buffer, sizeof(my_buffer))) {
    Serial.println("No storage");
    while (1);
  };
#endif

  Serial.println("MTP test");

#if USE_SDIO==1
  pinMode(2, OUTPUT);
#endif

}

void loop()
{
  mtpd.loop();

  logg(1000, "loop");
  //asm("wfi"); // may wait forever on T4.x
}

Now back to testing and/or other diversions

mjs513 · Nov 12, 2020

@KurtE
Thanks for making the changes to the sketch - was one of those things kept putting off

Works great - tested with a Winbond breakout on a T4.0 and works great.

Going to have another update today for the lib eventually

KurtE · Nov 12, 2020

I pushed a PR for it... Just for the fun of it

mjs513 · Nov 12, 2020

KurtE said:
I pushed a PR for it... Just for the fun of it

Just merged it

defragster · Nov 12, 2020

Good news - more files Nice! - I had a bit of an 'oh heck' moment when that sketch moved to T_4.1 existing disk and seeing nothing after it worked on the T_4.0 with same audio board ... then realized the number of files.

Also nice to have the unsightly but useful #ifdef wrapping the alternatives to make them obvious and properly sync'ed.

Will give it a try ...

mjs513 · Nov 12, 2020

Was just playing around with the LittleFS lib to see if I could get hack a QSPI Format function. Think its working if you want to try. This is what I added just for reference:

Code:

FLASHMEM
bool LittleFS_QSPIFlash::format()
{

	Serial.println("attemping to format existing media");
	if (lfs_format(&lfs, &config) < 0) {
		Serial.println("format failed :(");
		return false;
	}
	
	Serial.println("success");
	return true;
}

Attached are the 2 files that need to be replaced in source (WARNING THIS IS A HACK FOR NOW):

defragster · Nov 12, 2020

Swapped in those two files.

Ran QSPI Format from the Integrity Sketch.

Restarted the T_4.1 and this appeared:

Code:

attemping to mount existing media
couldn't mount media, attemping to format
  waited 26631 us
  waited 123 us
  waited 25700 us
  waited 122 us
attemping to mount freshly formatted media

So perhaps all seems well?

Then doing something NOT done before after a FORMAT on the restart::

Then asked for DIR and the list was NOT empty?

Code:

printDirectory QSPI_DISK
--------------DIR	0_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	1_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	2_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	3_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	5_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	6_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	8_dir / 

 0 dirs with 0 files of Size 0 Bytes

 7 dirs with 0 files of Size 0 Bytes
 Total 0 files of Size 0 Bytes

[  0.08] Awaiting input 0123456789rdchkfvp? loops left 0 >
d
printDirectory QSPI_DISK
--------------DIR	0_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	2_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	3_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	4_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	5_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	6_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	8_dir / 

 0 dirs with 0 files of Size 0 Bytes

 7 dirs with 0 files of Size 0 Bytes
 Total 0 files of Size 0 Bytes

So Not sure if:
> Format pulled from old FrankB code is failing - as noted it would not present usable media on RESTART like SPI does - the QSPI format required cold restart

mjs513 · Nov 12, 2020

@defragster - used my simple printdirectory sketch and before reformat I had:

Code:

printDirectory
--------------
FILE	PRINTOUTPUT1.txt		1256
FILE	file1.txt		64
FILE	file2.txt		64
FILE	file3.txt		64
FILE	mtpindex.dat		0
DIR	test1 / 
	FILE	file1.txt		32
DIR	test3 / 
	FILE	file3.txt		32

after format:

Code:

attemping to format existing media
  waited 28572 us
  waited 122 us
  waited 27736 us
  waited 122 us
attemping to mount freshly formatted media
success
printDirectory
--------------

Shows empty directory. Recycled power and showed no files or direcotries.

Question on your output:

Code:

printDirectory QSPI_DISK
--------------DIR	0_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	1_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	2_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	3_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	5_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	6_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	8_dir / 

 0 dirs with 0 files of Size 0 Bytes

 7 dirs with 0 files of Size 0 Bytes

Doesn;t the '------------DIR 0_dir / " mean that the directory wasn't found that you thought you had created - rest is showing 0 dirs with 0 files so confused?

Oh working on a rename function as well. Seems to be working but still needs testing.

defragster · Nov 12, 2020

@mjs513 - how are you triggering that "attemping to format existing media"? As noted I brought over the QSPI flash formatter that FrankB wrote - apparently it is not actually working to erase the flash as done?
> I assumed a true fresh LittleFS Flash would need to start with WIPED/formatted data blocks?

That output is summary per directory. If it prints anything - it was FOUND.

That shows root has 7 dirs in it but no files - and each of the 7 subdirs [0-7]_dir have "0 dirs with 0 files"

Which is close to right - except to see that it shows the FORMAT did not actually WIPE the data?

defragster · Nov 12, 2020

@mjs513 - I saw the earlier post about format and thought that was an edit in place thing Hack - though never found that - maybe it was to replace the 'f'ormat used in the integrity code I posted?

defragster · Nov 13, 2020

@mjs513 - same Beta T_4.1 with QSPI Flash.

Updated with Hack Format sources and that DIR data persists across the myfs.format(); the same as it was across what should have been a full flash format?

Okay I had a Teensy RESET after the format for fun and clarity and apparently the CACHE is not flushed or something?

Removing the RESET after myfs.format(); and then the DIR is CLEAN and empty as it should be!

But since already pasted here is what I saw with a reset after the format:

Code:

 RESET Teensy ...
T:\tCode\littleFS\LFSintegrity\LFSintegrity.ino Nov 13 2020 01:09:21
LittleFS Test : File Integrity
QSPI flash begin
Flash ID: EF 40 18
Flash size is 16.00 Mbyte
attemping to mount existing media
success
printDirectory QSPI_DISK
--------------DIR	0_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	1_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	3_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	4_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	5_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	7_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	8_dir / 

 0 dirs with 0 files of Size 0 Bytes

 7 dirs with 0 files of Size 0 Bytes
 Total 0 files of Size 0 Bytes
 0, 1-9 '#' passes continue loop before Pause
 'r' Restart Teensy
 'd' Directory of LittleFS
 'c' Continuous Loop
 'h' Hundred loops
 'k' Thousand loops
 'f' Format then Restart : 'SPI EraseEverything'
 'v' Verbose All Dir Prints - TOGGLE
 'p' Pause after all Dir prints - TOGGLE
 '?' Help list
?[B][  0.02] Awaiting input 0123456789rdchkfvp? loops left 0 >attemping to format existing media
  waited 27575 us
  waited 123 us
  waited 25581 us
  waited 123 us
success
 RESET Teensy ...[/B]
T:\tCode\littleFS\LFSintegrity\LFSintegrity.ino Nov 13 2020 01:09:21
LittleFS Test : File Integrity
QSPI flash begin
Flash ID: EF 40 18
Flash size is 16.00 Mbyte
attemping to mount existing media
success
printDirectory QSPI_DISK
--------------
 0 dirs with 0 files of Size 0 Bytes
 Total 0 files of Size 0 Bytes
 0, 1-9 '#' passes continue loop before Pause
 'r' Restart Teensy
 'd' Directory of LittleFS
 'c' Continuous Loop
 'h' Hundred loops
 'k' Thousand loops
 'f' Format then Restart : 'SPI EraseEverything'
 'v' Verbose All Dir Prints - TOGGLE
 'p' Pause after all Dir prints - TOGGLE
 '?' Help list
?  waited 25543 us
  waited 82 us
  waited 120 us
  waited 26455 us
  waited 96 us
  waited 121 us
  waited 25555 us
  waited 96 us
  waited 119 us
  waited 27539 us
  waited 96 us
  waited 120 us
  waited 25492 us
  waited 95 us
  waited 119 us
  waited 26448 us
  waited 96 us
  waited 122 us
  waited 25546 us
  waited 96 us
  waited 120 us
  waited 25486 us
  waited 96 us
  waited 120 us
  waited 26429 us
  waited 96 us
  waited 119 us
  waited 27467 us
  waited 95 us
  waited 120 us
[  0.02] Awaiting input 0123456789rdchkfvp? loops left 0 >
printDirectory QSPI_DISK
--------------DIR	0_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	2_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	3_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	5_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	6_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	7_dir / 

 0 dirs with 0 files of Size 0 Bytes
DIR	9_dir / 

 0 dirs with 0 files of Size 0 Bytes

 7 dirs with 0 files of Size 0 Bytes
 Total 0 files of Size 0 Bytes
[  0.07] Awaiting input 0123456789rdchkfvp? loops left 0 >

LittleFS port to Teensy/SPIFlash

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Attachments

Senior Member+

Senior Member+

Senior Member+

Senior Member+

Senior Member+