Operating and storage temp of Teensy3.5 ?

Status
Not open for further replies.

MajorLee6695

New member
Hello guys
I am new to this board. It's my first post.
I am a fabmanager in a fablab near Paris.
I just want to know the operating temp of the Teensy3.5 board.
I want to use it to make a ADIS16475 MMU recorder.
I search on the forum but i don't find the answer. I don't find the BOM on the website.
I find the schematic and datasheets of all major components.
CPU -40 +105°C and it is very good cause i want to work between -40 to +85°C but for 16MHz crystal there is no indication.
What is the reference of this one please ?

A subsidiary question:
Do you think that an sd card could resist to this temp ?
 
I believe Digi-Key has some SD Flash cards rated for industrial use (-40 to 85c). Slightly more expensive than others, but available.
 
Thanks for your reply grease_lighting. I also find one @Radiospares and normally I receive them today.
If it can be useful for someone else this is the RS ref : 126-4363 RS des. SD Kingston MicroSDHC 8 Go MLC Class 10 and manufacturer SDCIT/8GB from Kington.

No one knows the 16MHz crystal reference ?
 
Status
Not open for further replies.
Back
Top