Voltage rating of DC blocking caps on Teensy Audio Board

Status
Not open for further replies.

scrape

New member
Does anyone know the voltage rating of the four 2.2 uF capacitors on the stereo inputs/outputs of the Audio Board?

Also, are they polarized? They don't have a + symbol in the schematic I see, but on the other hand, they do have the curved plate, which could indicate the cathode (-). So, polarized... but then, I see that all of the capacitor symbols on the schematic have the curved plate... are they all polarized? I wouldn't have thought the 0.1 uF caps were polarized.

https://www.pjrc.com/store/schematic_audio4.png

Reason: I am incorporating a Teensy 3.2 + Audio Board as a DSP unit in a ham radio transceiver. The radio's audio input has +8V or so DC bias for an electret mic. So, (a) I want to make sure the blocking caps have a high enough rating, but also (b) I want to make sure the polarity is correct.

Thanks!
 
Status
Not open for further replies.
Back
Top