I'm just getting started with the USB Midi examples w/ a Teensy 3.0.
Am on Arduino IDE 1.8.10 on windows 7 with the latest PJRC Teensyduino libraries.
I uploaded the Buttons to USB MIDI example and when I run Ableton Live, it successfully receives MIDI note messages from the Teensy! Very cool.
But then I decided to use a free MIDI diagnostic tool to check what data was coming through, and I ran into a problem.
I'm using Pocket Midi 1.4.1, but every time I select the Teensy MIDI for either input or output port, I get an error: Port Open Failed.
This tool works with my other midi controllers, so I'm wondering if anyone has any ideas about what is different about Teensy's USB Midi implementation vs my M-Audio Axiom controller that doesn't exhibit this problem.
Thanks for any help.
Am on Arduino IDE 1.8.10 on windows 7 with the latest PJRC Teensyduino libraries.
I uploaded the Buttons to USB MIDI example and when I run Ableton Live, it successfully receives MIDI note messages from the Teensy! Very cool.
But then I decided to use a free MIDI diagnostic tool to check what data was coming through, and I ran into a problem.
I'm using Pocket Midi 1.4.1, but every time I select the Teensy MIDI for either input or output port, I get an error: Port Open Failed.
This tool works with my other midi controllers, so I'm wondering if anyone has any ideas about what is different about Teensy's USB Midi implementation vs my M-Audio Axiom controller that doesn't exhibit this problem.
Thanks for any help.