Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Custom board with PJRC Bootloader

  1. #1
    Junior Member
    Join Date
    Jul 2016

    Custom board with PJRC Bootloader

    Would a PJRC Bootloader chip support an MK20DX128VLQ10? Looking for more I/O pins.

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    AFAIK - the answer to date from Paul :: PJRC bootloader chips are limited to support of the same set of MCU chips used on shipping Teensy devices. For more pins there is the OSH Park ref design published by PJRC for the T_3.6 that exposes all of those extra pins - and that could be easily altered for the T_3.5 MCU if that makes a difference dropping USB support and slower clock freq.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts