Hi all,
I just got my Teensy 4.0 in the mail, installed Teensyduino 1.48 and I've tried to follow steps on using flight sim controls (https://www.pjrc.com/teensy/td_flightsim.html) but I noticed that under Tools>USB I do not see any USB options other than "Serial":
As a result, I can't run any sketch examples from:
File > Examples > Teensy > USB_FlightSim
If I momentarily change the board to Teensy 3.6 for example, all the USB types appear (including Flight Sim Controls) , but the USB_FlightSim code won't run obviously because the Teensy version is wrong. My arduino version is 1.8.10 by the way.
As a side note, basic examples seem to work (such as File>Examples>Teensy>Tutorial1>Blink)
What am I doing wrong?
Thanks a lot,
Bojan
I just got my Teensy 4.0 in the mail, installed Teensyduino 1.48 and I've tried to follow steps on using flight sim controls (https://www.pjrc.com/teensy/td_flightsim.html) but I noticed that under Tools>USB I do not see any USB options other than "Serial":
As a result, I can't run any sketch examples from:
File > Examples > Teensy > USB_FlightSim
If I momentarily change the board to Teensy 3.6 for example, all the USB types appear (including Flight Sim Controls) , but the USB_FlightSim code won't run obviously because the Teensy version is wrong. My arduino version is 1.8.10 by the way.
As a side note, basic examples seem to work (such as File>Examples>Teensy>Tutorial1>Blink)
What am I doing wrong?
Thanks a lot,
Bojan