Andy Belov
Well-known member
I just tested my PDB's audio part, which is a "reflow" of Paul's Audio Board.
The Guitar sketch works (synthesis), line input, phones, lien out work.
The microphone works, but the sound is like the "phaser" guitar effect, like it's going though a long paper tube, like "bouncy" sound.
Does anybody have a clue?
Here is the diagram and the PCB part for the audio.
I copied it from here (Schematic, Rev D): https://www.pjrc.com/store/teensy3_audio.html
There is a mistake there: RX and TX are reversed connecting to pins 7 and 8.
![pcb.jpg pcb.jpg](https://forum.pjrc.com/data/attachments/16/16214-92583de5a4189a0afaa2003a24a284b9.jpg)
The Guitar sketch works (synthesis), line input, phones, lien out work.
The microphone works, but the sound is like the "phaser" guitar effect, like it's going though a long paper tube, like "bouncy" sound.
Does anybody have a clue?
Here is the diagram and the PCB part for the audio.
I copied it from here (Schematic, Rev D): https://www.pjrc.com/store/teensy3_audio.html
There is a mistake there: RX and TX are reversed connecting to pins 7 and 8.
![Schema.jpg Schema.jpg](https://forum.pjrc.com/data/attachments/16/16213-216451dd324210528bd718b8237b7555.jpg)
![pcb.jpg pcb.jpg](https://forum.pjrc.com/data/attachments/16/16214-92583de5a4189a0afaa2003a24a284b9.jpg)