Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 5 of 5

Thread: Teensy 3.5 pins

Hybrid View

  1. #1

    Teensy 3.5 pins

    Sorry if this is a dumb question, but I cannot find any reference to what Pins 24 and 25 on the Teensy 3.5 can be used for - there is no indication on the pin-out diagram, and all the other pins have some designation.

    Again apologies for such a dumb question, but any help would be appreciated.

    Allen

  2. #2
    Senior Member+ MichaelMeissner's Avatar
    Join Date
    Nov 2012
    Location
    Ayer Massachussetts
    Posts
    3,486
    You can use them as a normal digital pin. I.e. use digitalWrite to make the pin go low or high, and digitalRead to read the status of the pin. As you said, there isn't anything specifically that uses the pin.

  3. #3
    Thanks Michael - I appreciate your help!

    Allen

  4. #4
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    21,340
    You can also use them with attachInterrupt(), because it's supported on all digital pins.

  5. #5
    Thank you Paul!

    Allen

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •