T3.5/6 I2c pin re-assignment query

[MatrixRat]

On T3.5/6, is it possible to re-direct SCL1,2 or 3 to Pin 35 and the corresponding SDA1,2 or 3 to Pin 30.

Reason being that I'm building a piece of hardware on a Mega protoshield intended to work on either an Arduino DUE or a Talldog DUE breakout. The DUE has a second I2c port on Talldog's pins 35 and 30.

Thanks in advance for any insights.

 

[PaulStoffregen]

On T3.5/6, is it possible to re-direct SCL1,2 or 3 to Pin 35 and the corresponding SDA1,2 or 3 to Pin 30.

No, not unless you solder wires. The muxes inside the chip for those pins simply do not have any I2C signals connected.

 

[MatrixRat]

Thank you Paul. More pins and header shunts to be added so end-user can configure accordingly.

All the best.